Filters
Competition Cams 974-16
Engine Valve Spring Kit; Single Inner Valve Springs: .937" OD, .697" ID
Competition Cams 17043-16
High Energy Aluminum 1.6 Ratio Roller Rocker Set for Ford 289-351W w/ 3/8" Stud; With a needle bearing fulcrum and a roller tip, our die cast aluminum rockers decrease friction and improve horsepower. Featuring a 1.6 ratio, these rockers fit Ford 289-351W w/ 3/8" studs.
Competition Cams 7831-16
High Energy 6.881" Long, 5/16" Diameter Pushrod Set; Exceeding OE specifications, this High Energy 6.881" long pushrod set work perfectly with High Energy or Magnum rockers. Factory length for '65+ Ford 255 and 302 with flat tappet cams.
Competition Cams 17044-16
High Energy Aluminum 1.6 Ratio Roller Rocker Set AMC, SBF, Olds w/ 7/16" Stud; With a needle bearing fulcrum and a roller tip, our die cast aluminum rockers decrease friction and improve horsepower. These self-aligning rockers fit AMC 290-401, Ford 289-351W and Olds 260-455 w/ 7/16" studs.
Competition Cams 11-677-4
Xtreme Energy 236/242 Solid Flat Cam for Chevrolet Big Block 396-454; Very strong mid-range torque and throttle response, 2500+ stall.
Competition Cams 13702-KIT
Trunnion Upgrade Kit for GM LS1/LS2/LS3/LS6 Rocker Arms.; Our trunnion upgrade kit converts a stock LS series rocker arm into a captured trunnion for increased stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with a C-clamp or a bench vise.
Competition Cams 613-16
Set of 16 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess; Super Locks: 10 Degree Angle, 11/32" Stem Size - Set of 16
Competition Cams 8931-16
Retro-Fit Hydraulic Roller Lifter Set for Ford 289-351W
Competition Cams 31-234-3
Xtreme Energy 212/218 Hydraulic Flat Cam for Ford 221-302; Strong torque thru low end and mid-range, good idle.
Competition Cams 4756CPG
Valve Spring Shim Kit - 1.640" OD, .635-.650" ID, .015", .030", .060" Thickness; This COMP shim kit includes a number of 1.640" diameter shims of various thickness. This kit includes 16 .015" thick shims, 16 .030" thick shims and 16 .060" thick shims.
Competition Cams 614-16
Set of 16 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height; lock angle and 11/32" valve stem size.
Competition Cams 4757CPG
Valve Spring Shim Kit - 1.500" OD, .645" ID, .015", .030", .060" Thickness; This COMP shim kit includes a number of 1.500" diameter shims of various thickness. This kit includes 16 .015" thick shims, 16 .030" thick shims and 16 .060" thick shims.
