Filters
Competition Cams 12-367-4
XFI 236/241 Hydraulic Flat Cam for Chevrolet Small Block; Good mid-range with exceptional top end. Requires chip, gear, plenum and exhaust mods. 2500+ stall.
Competition Cams 12-861-9
Oval Track 259/268 Solid Roller Cam for Chevrolet Small Block; 383-415c.i. IMCA, Late Model, Modifieds. Great torque.
Competition Cams 1630-1
Ultra Pro Magnum Rocker Arm w/ 1.7 Ratio Ford Boss 302, 351C, 429-460 7/16" Stud; This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.7 ratio, this rocker fits Ford Boss 302, 351C and 429-460 with a 7/16" diameter stud.
Competition Cams 191640
CR 235/237 Hydraulic Roller Cams for ('11-'14) Ford 5.0L Coyote; Max effort street/strip grind for heavily modified applications that operate above the factory rev limiter. Requires Spring Kit.
Competition Cams 23-706-9
Drag Race 263/270 Solid Roller Cam for Chrysler 383-440; Best all around bracket or Super Street cam. Best in light to medium weight car with 11:1 compression, 4200+ stall in 440, 4500+ stall in 383.
Competition Cams 35-827-9
Oval Track 267/274 Solid Roller Cam for Ford 351W; Great for large c.i. engines or high RPM 358 type engines.
Competition Cams 4682-16
ID Spring Locator Set of 16 - 1.300" OD, .570" ID, .060" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4682 seat's 1.300" OD works well with our 26925, 26926 and 26526 valve springs in .570" guide applications.
Competition Cams 4838-1
Raised 1 Piece Guide Plate for Ford 429-460 w/ 3/8" Pushrod and 7/16" Stud; Hardened and black oxide coated for durability, this raised one-piece guide plate is designed for Ford 429-460 engines with 7/16" studs and 3/8" pushrods.
Competition Cams 605-16
Hardened Steel Set of 16 - 7 Degree, 11/32", 4 Groove Street Locks Ford 351C; 16 Pairs Steel Street Locks: 4 Groove, 7 Degree Angle, 11/32" Stem Size
Competition Cams 712-1
11 Steel Retainer for Buick 350-455 w/ 1.225"-1.250" OD Valve Spring; Precision machined from chromemoly steel then black oxided, this 11 degree retainer is designed specifically for a Buick 350-455 with a 1.225"-1.250" O.D. valve spring.
Competition Cams 780-16
7 Degree Steel Retainer Set of 16 for 3/8" Valves w/ 1.500"-1.550" Spring; Precision machined from chromemoly steel then black oxided, these 7 degree retainers are designed specifically for 3/8" valve engines with 1.500"-1.550" outer diameter valve springs.
Competition Cams 7965-1
Hi-Tech 8.150" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.150" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.