Filters
Competition Cams 1634-1
Ultra Pro Magnum Self-Aligning Rocker Arm w/ 1.6 Ratio Ford for 3/8" Stud; This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.6 ratio, this self-aligning rocker fits Ford V8's with a 3/8" diameter stud.
Competition Cams 201-426-17
XFI 222/230 Hydraulic Roller Cam for Dodge 5.7/6.1L HEMI w/ VVT; Best all around performance grind for 6.4L applications.
Competition Cams 35-872-13
Street/Strip EFI 237/247 Hydraulic Roller Cam for Ford 5.0L; 331-363c.i. with 190-215cc head, 10:1-11:1 compression. Needs aftermarket intake, requires tuning.
Competition Cams 4690-16
ID Spring Locator Set of 16 - 1.253" OD, .780" ID, .120" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4690 seat's 1.253" OD works well with our 26918 beehive valve springs.
Competition Cams 4842-6
Flat 1 Piece Guide Plate Set of 6 for Olds 350-455 w/ 5/16" Pushrod 5/16" Stud; Flat 1 Piece Guide Plate Set for Oldsmobile 350-455 with 5/16" Pushrod and 5/16" Stud
Competition Cams 606-16
Hardened Steel Set of 16 - 7 Degree, 3/8", 2/4 Groove Street Locks for Chrysler; 16 Pairs Steel Street Locks: 2 and 4 Groove, 7 Degree Angle, 3/8" Stem Size
Competition Cams 713-16
7 Degree Steel Retainer Set of 16 for 8mm Valve Chevrolet LS w/ 26925 Spring; Precision machined from chromemoly steel then black oxided, these 7 degree retainers are designed specifically for GM LS engines using our 26925 dual valve springs.
Competition Cams 7635-12
Magnum 7.15" Long, .080" Wall, 5/16" Diameter Pushrod Set 12; Magnum Pushrods: 5/16" Diameter, 7.150" Length-1
Competition Cams 7811-8
High Energy 8.280" Long, 3/8" Diameter Pushrod Set; Exceeding OE specifications, this High Energy 8.280" long pushrod set works perfectly with High Energy or Magnum rockers. Factory length for Chevrolet 396-454 Big Block intake valves.
Competition Cams 7968-16
Hi-Tech 8.780" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.780" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 838-L
Roller Lifter Link Bar for GM GEN III LS1/LS2/LS6 and Ford 289-351W and SVO; Roller Lifter Link Bars: GM Gen III/LS1/LS2/LS6
Competition Cams 8614-1
Straight 8.100" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 8.100" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.
