Filters
Competition Cams 26925ts-KIT
GM LS Dual Valve Spring Kit w/ Tool Steel Retainers, .660" Max Lift; Including properly matched quality dual valve springs, 7 degree locks, viton seals, hardened seats and lightweight tool steel retainers, this spring kit is ready to bolt onto LS heads with aggressive cams with up to .650" valve lift.
Competition Cams 26926-1
Race Street 1.320" OD Dual Spring, 1.835" Installed Height, 1 Spring; Dual Valve Spring: 1.320" OD Outer, .654" ID Inner
Competition Cams 1820-16
Ultra Pro Magnum XD Rockers w/ 1.7 Ratio for Chevrolet Big Block w/ 7/16" Stud; Machined from 8650 steel with a billet pushrod seat insert, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. These 1820 rockers feature a 1.7 ratio for use with 7/16" stud Chevrolet 396-454 Big Block.
Competition Cams 511-16
Set of 16 Steel Viton Valve Seals for .500" Guide Size, 8mm Valve Stem; Providing the best sealing properties and spring clearance, viton valve seals are an excellent choice in performance applications. The 511 seals have a .600" OD and fit LS applications with 8mm valves and .500" OD guides.
Competition Cams 1212-16
High Energy Rocker Set w/ 1.5 Ratio for Chevrolet Small Block w/ 3/8" Stud; Perfect for stock or High Energy camshaft equipped engines, our High Energy rockers eliminate slop and feature a long slot for higher lift cams. These 1212 rockers feature a 1.5 ratio for 3/8" stud Chevrolet 265-400 Small Block.
Competition Cams 35-235-3
Xtreme 4x4 210/218 Hydraulic Flat Cam for Ford 351W; Good torque for 4x4, excellent mid-range power, great for RV or towing.
Competition Cams 641-16
Machined Steel Set of 16 - 7 Degree, 3/8", Single Groove Race Locks; Machined Steel Race Locks: 1 Groove, 7 Degree Angle, 3/8" Stem Size
Competition Cams 740-16
10 Degree Superlock Steel Retainer Set of 16 for 1.437"-1.500" OD Valve Spring; Precision machined from chromemoly steel then black oxided, these 10 degree retainers are designed specifically 1.437"-1.500" O.D. valve springs.
Competition Cams 741-16
10 Degree Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Valve Spring; Precision machined from chromemoly steel then black oxided, these 10 degree retainers are designed specifically for 1.500"-1.550" O.D. valve springs.
Competition Cams 310103001
TAPPET, DLC HYDRAULIC FLAT TAPPET .842" DIA GM APPLICATIONS SINGLE; Tappet features a Diamond-Like Coating (DLC) face that forms an extremely hard, tough and high-lubricity surface to reduce friction at the Cam lobe/lifter interface, extending lifter and Camshaft life significantly.
Competition Cams 21-223-4
Xtreme Energy 224/230 Hydraulic Flat Cam for Chrysler 383-440; Great for street machines, slightly rough idle works with stock converter but best with 1800+ stall.
Competition Cams 13704-KIT
Trunnion Upgrade Kit for GM LS7 and GEN V LT1; Our trunnion upgrade kit converts an OE GM LS7 and GEN V LT rocker into a captured trunnion for higher stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with a C-clamp or a bench vise.