Filters
Competition Cams 435-301-13
LST Stage 2 NSR Hydraulic Roller Camshaft for '03-'10 Ford 6.0/6.4L Powerstroke; No Springs Required. This is the perfect camshaft for most performance engine builds, taking full advantage of additional boost and more aggressive tunes allowed on modified engines.
Competition Cams 09-422-8
Magnum 215/220 Hydraulic Roller Cam for Chevrolet 262/4.3L; Performance cam for computer cars. Needs aftermarket chip, exhaust and mild stall. Strong mid-range and top end.
Competition Cams 11-600-8
Thumpr 227/241 Hydraulic Roller Cam for Chevrolet Big Block 396-454; High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle.
Competition Cams 12-908-9
Drag Race 264/270 Solid Roller Cam for Chevrolet Small Block; 4500+ stall, 11:1 compression, lower gears needed.
Competition Cams 1677-16
Ultra Pro Magnum 1.8 Ratio Rocker Arm Set for Pedestal Mount GM LS1/LS2/LS6; These Ultra Pro Magnum rockers are made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.8 ratio, these rockers fit non-adjustable pedestal mount LS1/2/6.
Competition Cams 20-221-3
Xtreme Energy 212/218 Hydraulic Flat Cam for Chrysler 273-360; Strong torque through low end and mid-range, good idle.
Competition Cams 24-278-4
Street and Strip 227/227 Hydraulic Flat Cam for Chrysler 426 HEMI; Good torque and power for daily driven street engines, stock converter. Slightly rough idle.
Competition Cams 3100KT-5
Adjustable Double Roller Timing Set for .005" Undersized 265-400 SBC; Featuring a pre-stretched, heat-treated, double roller chain, billet gears, an infinitely adjustable cam gear and 3 key crank gear, this adjustable timing set for .005" under Chevrolet 265-400 Small Block is ideal for street and race.
Competition Cams 33-248-4
Xtreme Energy 230/236 Hydraulic Flat Cam for 352-428; High performance street, very strong mid-range with headers, 2400+ stall and lower gears.
Competition Cams 4694-4
Spring Locator for 26120 Springs; Spring locators are the best ways to keep spring movement to a minimum. These locators will center the 26120 springs perfectly around the valve and prevent them from walking around.
Competition Cams 4854-8
Flat 1 Piece Guide Plate Set GM LS w/ 5/16" Pushrod and 8mm Stud; Hardened and black oxide coated for durability, this flat one-piece guide plate set is designed for GM LS engines with 8mm studs and 5/16" pushrods.
Competition Cams 7141-8
Magnum 9.250" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8; Magnum 9.250" Long, .080" Wall, 3/8" Diameter Pushrod - Set of 8
