Filters
Competition Cams 205
.945" Long Nylon Thrust Button for Chevrolet 396-454 Big Block; Set the camshaft endplay on your Chevrolet 396-454 with our .945" long nylon thrust button. This thrust button can be shimmed as needed to adjust the endplay.
Competition Cams 26056-16
Race Sportsman 1.454" OD Beehive Springs, 1.800" Installed Height, 16 Springs; Bottom 1.454" OD, 1.000" ID
Competition Cams 112-300-11
HRT No Springs Required Stage 1 Cam for Dodge Non-VVT 5.7/6.1L HEMI; No Springs Required (NSR) Stage 1 Grind for Gen III Hemi. Great mid-range torque w/ excellent power. Perfect for heavier vehicles, has great throttle response.
.jpg?fit=max&w=200&auto=compress,format)
Competition Cams 89341-2
Evolution HCT Lifters offer quite operation expected from a hydraulic tappet and higher RPM demand by many of today's modern engine builds. Most consistent, highest performing, and quietest hydraulic lifter on the market.
Competition Cams 3158KT
Adjustable Single Chain Timing Set for 3-Bolt, 1 Pole, 24X GM LS; Featuring a pre-stretched, heat-treated, single chain, billet gears, an infinitely adjustable cam gear and 3 key crank gear, this adjustable timing set for Chevrolet 3-bolt, 1 pole, 24X GM LS is ideal for street and race applications.
Competition Cams 7101CPG
Keyway Adjustable Billet Timing Set for '96-'02 Chevrolet 454-502 GEN VI; With precision machined steel billet gears, our keyway timing set for Chevrolet 454-502 GEN VI Big Block is built with bullet-proof durability. Features 9 keyway crank sprocket for 2 degree adjustment increments and double roller chain.
Competition Cams 310203016
TAPPET, DLC HYDRAULIC FLAT TAPPET .875" DIA FORD APPLICATIONS SET 8 CYL; Tappet features a Diamond-Like Coating (DLC) face that forms an extremely hard, tough and high-lubricity surface to reduce friction at the Cam lobe/lifter interface, extending lifter and Camshaft life significantly.
Competition Cams 26986-16
Performance Street 1.415" OD Beehive Spring, 1.700" Installed Height, 16 Springs; With a .575" maximum lift, these Beehive Valve Springs were designed for hydraulic or Solid flat tappet as well as hydraulic Roller cams.
Competition Cams 2138
Magnum Double Row Timing Set for '84-'92 Ford 5.0L, 302 and 351W; Featuring an induction hardened cast iron cam gear with a billet crank gear, this Magnum timing set has a heavy-duty, heat-treated double row chain for mild/street performance '84-'92 Ford 5.0/302 and 351W w/ two-piece fuel pump eccentric.
Competition Cams 601-16
Hardened Steel Set of 16 - 7 Degree, 11/32", Single Groove Street Locks; Designed for milder, street applications, this set of 16, 7 degree lock angle valve locks are stamped then hardened for use with milder spring loads in applications with 11/32" diameter single groove valves.
Competition Cams 517-16
Set of 16 Metal Body Viton Valve Seals for .500" Guide Size, 11/32" Valve Stem; Providing the best sealing properties and spring clearance, viton valve seals are an excellent choice in performance applications. The 517 seals have a .545" OD and fit applications with 11/32" valves and .500" OD guides.
Competition Cams 951-16
Race Extreme 1.635" OD Dual Springs, 1.950" Installed Height, 16 Springs; Engine Valve Spring Kit