Filters
Competition Cams 611-1
10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess; Super Lock: 10 Degree Angle, 11/32" Stem Size
Competition Cams 716-16
7 Degree Titanium Retainer Set of 16 for 7245 Dual Conical Spring; Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 7 degree retainers fit engines with our 7245 Dual Conical Valve Springs.
Competition Cams 7649-16
Magnum 8.500" Long, .080" Wall, 5/16" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 8.500" long, 5/16" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7826-1
High Energy 6.248" Long, 5/16" Diameter Pushrod; Exceeding OE specifications, this High Energy 6.248" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '85+ Ford 302 with OE hydraulic roller cams.
Competition Cams 7979-16
Hi-Tech 9.350" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 9.350" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8406-1
Hi-Tech 7.400" Long, .105" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .105" wall chromemoly steel then black oxide coated and heat-treated, this 7.400" long Hi-Tech 5/16" diameter pushrod is 17% stiffer than .080" wall Hi-Tech pushrods.
Competition Cams 8627-1
Straight 8.750" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 8.750" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 8903-1
Hi-Tech 7.650" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 7.650" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 972-16
Engine Valve Spring Kit; Single Outer Valve Springs: 1.460" OD, 1.060" ID
Competition Cams CL08-413-8
Xtreme 4x4 220/224 Hydraulic Roller Cam and Lifter Kit for OE Roller SBC; Good mid-range power, needs headers, 3.55-4.10 gears, 2000 stall. Noticeable idle.
Competition Cams CL35-218-3
High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for Ford 351W; Moderate high performance street driving. Mild street machines, great for daily drivers. Noticeable idle.
Competition Cams K12-243-3
Xtreme 4x4 226/234 Hydraulic Flat Cam K-Kit for Chevrolet Small Block; Strong mid-range and throttle response, likes headers, gears, 2200+ stall.
