Filters
Competition Cams 69-400-8
High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6; Performance upgrade for use with aftermarket turbo. Downpipe, intercooler preferred. Needs computer modifications or aftermarket computer.
Competition Cams 751-16
10 Degree Steel Retainer Set of 16 for 983 Spring; Precision machined from chromemoly steel then black oxided, these 10 degree retainers are designed specifically for engines using our 983 Ovate Wire valve springs.
Competition Cams 7781-16
Hi-Tech 8.900" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.900" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7945-16
Hi-Tech 8.400" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.400" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8308-16
Hi-Tech Oil Restricting 7.450" Long, .080" Wall, 5/16" Diameter Pushrod Set; With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 7.450" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.
Competition Cams 8548-1
Hi-Tech One-Piece 9.300" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 9.300" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8712-1
Hi-Tech 10.350" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 10.350" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams CL12-244-4
Xtreme Marine 234/244 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block; Jet boat with A or B impeller, good off-shore high performance cam, rough idle.
Competition Cams CL32-651-8
Magnum 245/245 Hydraulic Roller Cam and Lifter Kit for Ford 351C, 351M-400M; Street/strip only. 4 speed or 3000+ stall and 4.10 or lower gear. Higher compression, aftermarket intake and headers.
Competition Cams CL69-300-8
High Energy 212/212 Hydraulic Roller Cam/Lifter Kit Buick Grand National 231 V6; Stock or aftermarket turbo. Downpipe and computer modifications.
