Filters
Competition Cams 33-601-5
Mutha' Thumpr 234/249 Hydraulic Flat Cam for Ford 352-428; High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Competition Cams 4011
Solid Stud Girdle Chevrolet Small Block w/ Brownfield Head and 7/16" Stud; Constructed from 6061-T6 aluminum this solid bar stud girdle set for 7/16" stud Chevrolet 265-400 Small Block w/ Brownfield head ties rocker studs together to properly locate them. Kit includes hex adjusting nuts, set screws and hardware.
Competition Cams 7163-1
Magnum 7.450" Long, .080" Wall, 3/8" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 7.450" long, 3/8" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7651-1
Magnum 8.680" Long, .080" Wall, 5/16" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 8.680" long, 5/16" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7827-16
High Energy 6.821" Long, 5/16" Diameter Pushrod Set; Exceeding OE specifications, this High Energy 6.821" long pushrod set works perfectly with High Energy or Magnum rockers. .060" shorter than factory length for '68-'85 Ford 255-302.
Competition Cams 7980-16
Hi-Tech 7.850" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 7.850" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8407-16
Hi-Tech 7.450" Long, .105" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .105" wall chromemoly steel then black oxide coated and heat-treated, these 7.450" long Hi-Tech 5/16" diameter pushrods are 17% stiffer than .080" wall Hi-Tech pushrods.
Competition Cams 8628-16
Straight 8.800" Long, .165" Wall, 7/16" Diameter Pushrod Set; These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 8.800" long with a 5/16" ball end and 210 radius, These pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 8904-16
Hi-Tech 7.700" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 7.700" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 973-12
VALVE SPRINGS, 0.970" INNER; Single Inner Valve Springs: .970" OD, .700" ID
Competition Cams CL08-417-8
Xtreme Marine 218/224 Hydraulic Roller Cam and Lifter Kit for OE Roller SBC; Largest for inboard/outboard, very good mid-range.
Competition Cams CL15-200-4
High Energy 206/206 Hydraulic Flat Cam and Lifter Kit Chevrolet 200-229/3.8L V6; Strong torque, good for trucks, 4WD and mild towing. Works with stock computer. Smooth idle and good mileage.
