Filters
Competition Cams 8629-1
Straight 8.850" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 8.850" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 8905-1
Hi-Tech 7.750" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 7.750" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 973-16
Engine Valve Spring Kit; Single Inner Valve Springs: .970" OD, .700" ID
Competition Cams CL08-418-8
Xtreme Marine 224/230 Hydraulic Roller Cam and Lifter Kit for OE Roller SBC; Good for jet boat with A or B impeller, strong mid-range power, needs good exhaust.
Competition Cams CL15-201-4
High Energy 212/212 Hydraulic Flat Cam and Lifter Kit Chevrolet 200-229/3.8L V6; Good cam for highway use, off-road and towing. Good for trucks with low gear ratios.
Competition Cams CL35-234-3
Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit for Ford 351W; Strong torque through low end and mid-range, good idle.
Competition Cams K12-249-4
XE Computer Controlled 206/212 Hydraulic Flat Cam K-Kit Chevrolet Small Block; Great in throttle body, crossfire or carbureted engine and 305 TPI.
Competition Cams K33-246-4
Magnum 248/248 Solid Flat Cam K-Kit for Ford 352-428; Good for street/strip cars. Use 10:1+ compression, low gears, 3000+ stall or 4 speed. Very rough idle.
Competition Cams RPM1436-16
Magnum 1.6 Rocker Arm and Magnum Pushrod Kit for Ford 351W; Our rocker arm and pushrod kit for Ford 351 Windsor includes a set of our 1.6 ratio self-aligning Magnum rockers and 8.150" long Magnum pushrods.
Competition Cams SK12-450-8
Magnum 230/230 Hydraulic Roller Cam SK-Kit for Chevrolet Small Block; Great for street machines. Best with headers and aftermarket intake. Rough idle. Limited vacuum. 2500+ stall.
Competition Cams 6100FG-1
BELT GUARD, FRONT, FOR 6100 LO; Front Belt Guard for #6100 Magnum Belt Drive System
Competition Cams SK35-427-8
Xtreme Energy 242/248 Hydraulic Roller Cam SK-Kit for Ford 351W; Street/strip, 9.5:1 compression, intake, headers, 3000+ converter, 4.10+ gears, rough idle.
