Filters
Competition Cams 4014
Rocker Arm Stud Girdle for Ford 289, 302 and 351W w/ 7/16" Stud; Constructed from 6061-T6 aluminum this solid bar stud girdle set for 7/16" stud Ford 289-302 and 351 Windsor ties rocker studs together to properly locate them. Kit includes hex adjusting nuts, set screws and hardware.
Competition Cams 4872-1
ID Spring Locator - 1.300" OD, .520" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4872 features a 1.300" OD and a .520" ID which works well for our 26918 Beehive valve spring.
Competition Cams 612-1
10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess; Super Locks: 10 Degree Angle, 3/8" Stem Size
Competition Cams 7164-16
Magnum 7.750" Long, .080" Wall, 3/8" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 7.750" long, 3/8" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7652-1
Magnum 8.900" Long, .080" Wall, 5/16" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 8.900" long, 5/16" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7829-1
High Energy 8.096" Long, 5/16" Diameter Pushrod; Exceeding OE specifications, this High Energy 8.096" long pushrod works perfectly with High Energy or Magnum rockers. .060" shorter than factory length for '69-'78 Ford 351 Windsor.
Competition Cams 7981-16
Hi-Tech 7.950" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 7.950" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8409-1
Hi-Tech 7.700" Long, .105" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .105" wall chromemoly steel then black oxide coated and heat-treated, this 7.700" long Hi-Tech 5/16" diameter pushrod is 17% stiffer than .080" wall Hi-Tech pushrods.
Competition Cams 8630-1
Straight 8.900" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 8.900" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 890C-1
Endure-X Solid Roller Lifter w/ .875" Diameter, Center Pushrod Seat, .300" Tall; Endure-X Solid Roller Lifter, .875" Diameter, Centered, .300" Tall - Single
Competition Cams CL08-422-8
Xtreme Energy 218/224 Hydraulic Roller Cam and Lifter Kit for OE Roller SBC; High performance application, largest with stock converter, noticeable idle.
