Filters
Competition Cams 7983-1
Hi-Tech 8.000" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.000" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8409-16
Hi-Tech 7.700" Long, .105" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .105" wall chromemoly steel then black oxide coated and heat-treated, these 7.700" long Hi-Tech 5/16" diameter pushrods are 17% stiffer than .080" wall Hi-Tech pushrods.
Competition Cams 863-1
Pro Magnum Hydraulic Flat Lifter for Oldsmobile 260-455 and Pontiac 326-455.; This Pro Magnum lifter is designed to perform at higher RPM without any harmful pumping up. This lifter for Oldsmobile 260-455 and Pontiac 326-455 yields significant power increase over standard hydraulic lifters.
Competition Cams 890R-1
Endure-X Solid Roller Lifter w/ .875" Diameter, Right Pushrod Seat, .300" Taller; Endure-X Solid Roller Lifter, .875" Diameter, .180" Right Offset, .300" Tall - Single
Competition Cams CL08-430-8
Magnum 224/224 Hydraulic Roller Cam and Lifter Kit for OE Roller SBC; High performance street use. Aftermarket intake, headers and 2000+ stall, 3.40 to 4.10 gears. Mild rough idle.
Competition Cams CL18-115-4
Xtreme Energy 192/200 Hydraulic Flat Cam and Lifter Kit for Chevrolet 262/4.3L; Excellent torque/good mileage. Works well with high gear ratios and overdrive transmissions. Good city driving.
Competition Cams CL35-242-3
Xtreme Energy 224/230 Hydraulic Flat Cam and Lifter Kit for Ford 351W; Great for street machine, 2200+ stall.
Competition Cams K12-262-4
XE Computer Controlled 218/224 Hydraulic Flat Cam K-Kit Chevrolet Small Block; Good for TPI 305 or 350 with aftermarket chip and upgraded exhaust.
Competition Cams RPM1601-16
Ultra Pro Magnum 1.52 Rocker and Magnum Pushrod Kit for Chevrolet 262-400 SBC; This rocker arm and pushrod kit for Chevrolet 262-400 Small Block includes a set of our 1.52 ratio Ultra Pro Magnum rocker arms and our 7.800" long Magnum pushrods.
Competition Cams SK12-466-8
XFI 218/224 Hydraulic Roller Cam SK-Kit for Chevrolet Small Block; Ample low end with very good mid-range. Gear and exhaust upgrade needed. Largest cam for stock converter.
Competition Cams 613-12
Set of 12 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess; 11/32", Single Groove Lock with o Lash Cap Recess - Set of 12
Competition Cams SK35-450-8
Magnum 230/230 Hydraulic Roller Cam SK-Kit for Ford 5.0L; Street/strip applications. 5 speed or 2500+ stall, 4.10 or lower gears with higher compression. Aftermarket intake and exhaust.
