Filters
Competition Cams SK12-467-8
XFI 230/236 Hydraulic Roller Cam SK-Kit for Chevrolet Small Block; Great for Hot Street". Must upgrade intake gear and exhaust for maximum performance. 2500+ Stall.
Competition Cams 614-8
Set of 8 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050" Height; 11/32", Single Groove Lock with o Lash Cap Recess, +.050" Height - Set of 8
Competition Cams 96999B-16
Sportsman Solid Roller Lifter Set w/ Bushing for Chevrolet Big Block; Sportsman Solid Roller Lifters with Bushings for Chevrolet 396-454, .904" Diameter, .180" Left/Right Offset - Set of 16
Competition Cams 54-317-11
Stage 2 LST Max HP Solid Roller Cam for 3-Bolt LS w/ Aftermarket Pistons; Best maximum power LS drag race solid roller. Requires aftermarket pistons w/ valve reliefs. Drag race power with street durability. Stable to 7500 RPM w/ CK & MK Kits.
Competition Cams 15820-16
Short Travel Link Bar Hydraulic Roller Lifter Set Chrysler for 6.4L HEMI; These short travel link bar hydraulic roller lifters allow for light pre-load and reduced oil volume for the highest revving lifter for Chrysler 6.4 HEMI.
Competition Cams 11-670-4
Nostalgia Plus 229/236 Hydraulic Flat Cam for Chverolet Big Block 396-454; Exhaust note of GM LS6 cam w/ hydraulic lifters and increased horsepower.
Competition Cams 12-501-5
Tight Lash 242/246 Solid Flat Cam for Chevrolet Small Block; Good short track camshaft for smaller engines, 327-350, with restrictions. 1/4 to 3/8 track with tight corners.
Competition Cams 1321H-1
Bolts and Dividers Kit for 1621 Chrysler B/RB 383-440 Shaft Mount Rocker Kit; This kit includes 4 long clamps, 6 short clamps along with the bolts needed to properly install our 1621-16 Ultra Pro Magnum Shaft-Mount rocker system for Chrysler B/RB 383-440.
Competition Cams 20-309-4
Magnum Muscle 222/226 Hydraulic Flat Cam for Chrysler 273-360; Factory I.D. 2899206 for: 340c.i., 1968-71, factory 275 HP, 340c.i., 1970, factory 290 HP, 340c.i., 1972-73, factory 240 HP.
Competition Cams 31-215-2
High Energy 206/206 Hydraulic Flat Cam for Ford 221-302; Good for low RPM torque in 289-302. Good towing in 302 automatic. Smooth idle.
Competition Cams 4016
Stud Girdle for Ford 351C Boss w/ Ford Motorsport Head w/ 7/16" Stud; Made from 6061-T6 aluminum this solid bar stud girdle set for 7/16" stud Ford 351 Cleveland w/ Ford Motorsport heads ties rocker studs together to properly locate them. Includes hex adjusting nuts, set screws and hardware.
Competition Cams 4705-16
ID Spring Locator Set of 16 - 1.300" OD, .570" ID, .060" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4705 seat's 1.300" OD works well with our 26915 and 26918 Beehive valve springs in .570" OD Guide applications.
