Filters
Competition Cams 12-504-5
Tight Lash 254/254 Solid Flat Cam for Chevrolet Small Block; Good baseline cam for Late Model Stock. Short 1/4-3/8 mile asphalt track. Best with 358, limited intake and carb.
Competition Cams 1321S-1
Replacement Screw for 1621/1622 Chrysler 273-360, 383-440 Shaft Mount Rocker Kit; This adjuster screw replaces the screw that comes with our 1621 and 1622 shaft-mount rocker systems for Chrysler 273-360 and 383-440.
Competition Cams 17044-1
High Energy Aluminum 1.6 Ratio Roller Rocker for AMC, SBF, Olds w/ 7/16" Stud; With a needle bearing fulcrum and a roller tip, our die cast aluminum rockers decrease friction and improve horsepower. This self-aligning 1.6 rocker fits AMC 290-401, Ford 289-351W and Olds 260-455 w/ a 7/16" stud.
Competition Cams 31-218-2
High Energy/Marine 218/218 Hydraulic Flat Cam for Ford 221-302; Good for daily driven performance vehicles. Mid-range power. Slightly lower gears. Mild rough idle. Single or dual engines. Best for inboard/outboard. Noticeable idle.
Competition Cams 4017
Stud Girdle for Ford 429-460 w/ TFS Motorsport Head w/ 7/16" Stud; Made from 6061-T6 aluminum this solid bar stud girdle set for 7/16" stud Ford 429-460 w/ TFS Motorsport heads ties rocker studs together to properly locate them. Includes hex adjusting nuts, set screws and hardware.
Competition Cams 48-802-11
Xtreme Energy 230/236 Hydraulic Roller Cam for Chevrolet 348-409; Great for street/strip 409 cam. 2800 converter needed. Aftermarket intake & headers will yield best results. 9.5:1 compression. Rough idle.
Competition Cams 612-4
Set of 4 - 10 Degree, 3/8", Single Groove Locks w/ Lash Cap Recess; 3/8 Super Lock
Competition Cams 7167-16
Magnum 8.200" Long, .080" Wall, 3/8" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 8.200" long, 3/8" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7655-16
Magnum 9.450" Long, .080" Wall, 5/16" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 9.450" long, 5/16" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7831-1
High Energy 6.881" Long, 5/16" Diameter Pushrod; Exceeding OE specifications, this High Energy 6.881" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '65+ Ford 255 and 302 with flat tappet cams.
Competition Cams 7984-16
Hi-Tech 7.900" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 7.900" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
