Filters
Competition Cams 4019
Spring Loaded Stud Girdle Chevrolet Small Block w/ Brodix Head and 3/8" Stud; Made of 6061-T6 aluminum this spring-loaded stud girdle set for 3/8" stud Chevrolet 265-400 Small Block w/ Brodix Pontiac 40/60 heads ties rocker studs together to properly locate them. Includes hex adjusting nuts, set screws and hardware.
Competition Cams 4708-100
OD Spring Locator Set of 100 - 1.780" OD, .640" ID, .060" Thick
Competition Cams 613-100
Set of 100 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess
Competition Cams 7169-1
Magnum 8.300" Long, .080" Wall, 3/8" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 8.300" long, 3/8" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7657-16
Magnum 9.600" Long, .080" Wall, 5/16" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 9.600" long, 5/16" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7832-16
High Energy 8.412" Long, 5/16" Diameter Pushrod Set; Exceeding OE specifications, this High Energy 8.412" long pushrod set works perfectly with High Energy or Magnum rockers. Factory length for '70-'74 Ford 351C and Cobra Jet.
Competition Cams 7986-16
Hi-Tech 8.100" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.100" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 841-16
Endure-X Solid Roller Lifter Set for HEMI-Type Ford 429-460; Endure-X Solid Roller Lifters for HEMI-Type Ford 429-460, .875" Diameter, Centered - Set of 16
Competition Cams 8634-1
Straight 9.100" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 9.100" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 892L-1
Endure-X Solid Roller Lifter w/ .904" Diameter, Left Pushrod Seat, .300" Taller; Endure-X Single Solid Roller Lifter, .904" Diameter, .210" Left Offset, .300" Tall - Single
Competition Cams 19018-8
Ultra ARC Narrow Rockers w/ 1.6 Ratio for '88+ Chevrolet w/ 3/8" Stud
