Filters
Competition Cams CL35-306-8
Blower 224/230 Hydraulic Roller Cam and Lifter Kit for Ford 5.0L; Supercharged combinations with heads, intake, headers. 3.55-3.73 gear, mild stall.
Competition Cams GK08-600-8
Thumpr 227/241 Hydraulic Roller Cam GK-Kit for OE Roller SBC; High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle.
Competition Cams K12-366-4
XFI 224/231 Hydraulic Flat Cam K-Kit for Chevrolet Small Block; Excellent mid-range for TPI 350 with chip upgrade, injectors, plenum and exhaust system. 2000+ stall.
Competition Cams RPR200
Magnum 1.52 Rocker and HE Pushrod Kit Retro-Fit Roller Chevrolet 262-400 SBC; The RPR200 Rocker Arm and Pushrod Kit for retro-fit roller Chevrolet 262-400 Small Block includes a set of our 1.52 ratio Magnum rockers and our 7.266" long High Energy pushrods.
Competition Cams SK12-568-4
Nitrous HP 240/253 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block; Pro Street applications, excellent for multi-stage kits or 671 blower. 2800+ stall.
Competition Cams 1757-4
7mm 7 Degree Tool Steel Retainer for 26056 Springs in our 9709-KIT Spring Kit.; These 1757 Tool Steel material retainers are the most cost-effective performance retainer one can buy for use with our 26056 Beehive springs. Nearly as light as titanium at a fraction of the cost.
Competition Cams 98500C-4
Race XD Center Pushrod Seat Set for 0.842"/0.875" Diameter Lifters; Race XD Solid Roller Lifters are the most modular solid roller lifters available thanks to these offset seats. Designed for 0.842"/0.875" Race XD Lifters, this set of four seats are centered.
Competition Cams 11-678-20
Xtreme Energy NIT 244/252 Solid Flat Cam for Chevrolet Big Block 396-454; Street/strip, 3000+ stall, likes headers and gears, rough idle. Nitrided.
Competition Cams 12-511-5
Tight Lash 242/250 Solid Flat Cam for Chevrolet Small Block; Use with 305-350 on 1/4 to 3/8 high banked track in heavy car with limited intake and carburetor.
Competition Cams 17045-16
High Energy Aluminum 1.73 Ratio Rocker Set for Ford 351C, 429-460 w/ 7/16" Stud; With a needle bearing fulcrum and a roller tip, our die cast aluminum rockers decrease friction and improve horsepower. Featuring a 1.73 ratio, these rockers fit Ford 351C and 429-460 w/ 7/16" studs.
Competition Cams 31-226-3
Magnum/Marine 230/230 Hydraulic Flat Cam for Ford 221-302; Broad power. 2500+ stall, low gears, 9.5:1 compression and headers. Rough idle. Off shore type boat. Strong performance, rough idle.
Competition Cams 4708-16
OD Spring Locator Set of 16 - 1.780" OD, .640" ID, .060" Thickness; Constructed from hardened steel alloy, COMP's locator cups handle high RPM and extreme spring pressures while holding the spring. Our 4708 locator features a 1.780" OD with a .640" ID that works with 947, 948, 26082 and 26028 springs.
