Filters
Competition Cams 7169-16
Magnum 8.300" Long, .080" Wall, 3/8" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 8.300" long, 3/8" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7658-1
Magnum 9.650" Long, .080" Wall, 5/16" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 9.650" long, 5/16" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7833-1
High Energy 9.621" Long, 3/8" Diameter Pushrod; Exceeding OE specifications, this High Energy 9.621" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '65-'72 Ford 352-428 with non-adjustable rockers.
Competition Cams 84-119-6
High Energy 204/204 Solid Cam for Nissan 2400-2800cc 6 Cylinder; Better torque and power than OEM cam, but smooth and efficient. Smooth idle.
Competition Cams 8634-16
Straight 9.100" Long, .165" Wall, 7/16" Diameter Pushrod Set; These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 9.100" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 892R-1
Endure-X Solid Roller Lifter w/ .904" Diameter, Right Pushrod Seat, .300" Taller; Endure-X Single Solid Roller Lifter, .904" Diameter, .210" Right Offset, .300" Tall - Single
Competition Cams 201-330-17
HRT Turbo Stage 1 Hydraulic Roller Camshaft for '09+ Dodge 5.7/6.4L HEMI; Perfect Choice for 5.7L Eagle or 6.4L Apache with responsive, street type turbo systems and keeping limited phaser control for off idle response. (Req DOD Delete, 26918 Springs & Phaser Limiter)
Competition Cams CL18-430-8
Magnum 224/224 Hydraulic Roller Cam and Lifter Kit for Chevrolet 262/4.3L; Limited high performance street use. Aftermarket intake, headers and 2500+ stall, 3.40-4.10 gears. Mild rough idle.
Competition Cams CL35-308-8
Magnum Computer Controlled 210/215 Hydraulic Roller Cam and Lifter Kit Ford 5.0L; Good stock upgrade. Best with mild tuning.
Competition Cams GK08-601-8
Mutha' Thumpr 235/249 Hydraulic Roller Cam GK-Kit for OE Roller SBC; High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Competition Cams K12-367-4
XFI 236/241 Hydraulic Flat Cam K-Kit for Chevrolet Small Block; Good mid-range with exceptional top end. Requires chip, gear, plenum and exhaust mods. 2500+ stall.
