Filters
Competition Cams 4709-16
OD Spring Locator Set of 16 - 1.455" OD, .570" ID, .060" Thickness; Constructed from hardened steel alloy, COMP's locator cups handle high RPM and extreme spring pressures while holding the spring. Our 4709 features a 1.455" OD with a .570" ID that works with our 26921, 26926, and 26925 dual valve springs.
Competition Cams 54-412-11
XFI RPM 212/218 Hydraulic Roller Cam for GM LS GEN III/IV; Good torque and very strong mid-range power. Good performance cam.
Competition Cams 7171-1
Magnum 8.450" Long, .080" Wall, 3/8" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 8.450" long, 3/8" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7660-1
Magnum 9.750" Long, .080" Wall, 5/16" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 9.750" long, 5/16" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7835-1
High Energy 8.152" Long, 5/16" Diameter Pushrod; Exceeding OE specifications, this High Energy 8.152" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '69-'78 Ford 351 Windsor.
Competition Cams 7989-1
Hi-Tech 8.200" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.200" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8412-16
Hi-Tech 7.850" Long, .105" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .105" wall chromemoly steel then black oxide coated and heat-treated, these 7.850" long Hi-Tech 5/16" diameter pushrods are 17% stiffer than .080" wall Hi-Tech pushrods.
Competition Cams 8636-16
Straight 9.200" Long, .165" Wall, 7/16" Diameter Pushrod Set; These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 9.200" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 893-16
Endure-X Solid Roller Lifter Set for Chevrolet Big Block; Endure-X Solid Roller Lifters for Chevrolet V8 396-454 (1965-96) .842" Diameter, Centered, Small Base Circle - Set of 16
Competition Cams 980-16
Engine Valve Spring Kit; Single Outer Valve Springs: 1.230" OD, .876" ID
Competition Cams CL08-500-8
XE Computer Controlled 206/212 Hydraulic Roller Cam and Lifter Kit OE Roller SBC; For throttle body 305 or 350, very good economy and power.
Competition Cams CL20-214-4
Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for Chrysler 273-360; Mild high performance in 340, 3.53-3.91 gears, dual exhaust and 9:1 compression.
