Filters
Competition Cams 7664-16
Magnum 9.647" Long, .080" Wall, 3/8" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 9.647" long, 3/8" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7839-16
High Energy 9.560" Long, 5/16" Diameter Pushrod Set; Exceeding OE specifications, this High Energy 9.560" long pushrod set works perfectly with High Energy or Magnum rockers. .060" longer than factory length for '71-'79 Ford 351M and 400M.
Competition Cams 7992-1
Hi-Tech 8.450" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.450" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8414-16
Hi-Tech 7.950" Long, .105" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .105" wall chromemoly steel then black oxide coated and heat-treated, these 7.950" long Hi-Tech 5/16" diameter pushrods are 17% stiffer than .080" wall Hi-Tech pushrods.
Competition Cams 8641-16
Straight 9.400" Long, .165" Wall, 7/16" Diameter Pushrod Set; These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 9.400" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 8956-16
Endure-X Solid Roller Lifter Set for GM LS GEN III LS1/LS2/LS6/LS7/LSX; Endure-X Solid Roller Lifters for GM LS Gen III LS1/LS2/LS6, .842" Diameter, Centered - Set of 16
Competition Cams CL09-415-8
Mag Computer Control 210/215 Hydraulic Roller Cam/Lifter Kit Chevrolet 262/4.3L; Works with throttle body and sequential port injection with aftermarket chip. Good low end and mid-range.
Competition Cams CL42-601-11
Mutha' Thumpr 235/249 Hydraulic Roller Cam and Lifter Kit for Oldsmobile 260-455; High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Competition Cams CL20-228-4
Xtreme Energy HI-LIFT 241/247 Hydraulic Flat Cam and Lifter Kit Chrysler 273-360; Serious street/strip cam. Strong mid-range and upper RPM power. Hi-lift design to take advantage of ported heads and single plane intake, 3000+ stall with 9.5:1 compression.
Competition Cams CL35-410-8
Magnum 206/206 Hydraulic Roller Cam and Lifter Kit for Ford 5.0L; Best with stock or slightly modified engine for economy or towing. Stock gears and torque converter. Smooth idle.
Competition Cams GK12-602-8
Big Mutha' Thumpr 243/257 Hydraulic Roller Cam GK-Kit for Chevrolet Small Block; Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.