Filters
Competition Cams 20-600-4
Thumpr 227/241 Hydraulic Flat Cam for Chrysler 273-360; High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
Competition Cams 34-232-4
Xtreme Marine 218/224 Hydraulic Flat Cam for Ford 429,460; Strong low end and mid-range power, smooth idle.
Competition Cams 4713-1
ID Spring Locator - 1.565" OD, .535" ID, .100" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4713 features a 1.565" OD and a .535" ID.
Competition Cams 617-16
Set of 16 - 10 Degree, .310", Single Groove Locks w/o Lash Cap Recess; Super Locks: 10 Degree Angle, .310" Stem Size - Set of 16
Competition Cams 7175-1
Magnum 8.750" Long, .080" Wall, 3/8" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 8.750" long, 3/8" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 76-800-9
Xtreme Energy 191/201 Hydraulic Roller Cam for GM 3800/3.8L V6; Performance upgrade for stock camshaft. Naturally aspirated, daily usage. Significant improvement over stock. Must replace valve springs.
Competition Cams 7840-1
High Energy 9.315" Long, 5/16" Diameter Pushrod; Exceeding OE specifications, this High Energy 9.315" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '68-'78 Chrysler 440 with non-adjustable rockers.
Competition Cams 7992-16
Hi-Tech 8.450" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.450" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8415-1
Hi-Tech 8.000" Long, .105" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .105" wall chromemoly steel then black oxide coated and heat-treated, this 8.000" long Hi-Tech 5/16" diameter pushrod is 17% stiffer than .080" wall Hi-Tech pushrods.
Competition Cams 864-16
High Energy Hydraulic Flat Lifter Set of 16 for Pontiac 151 Iron Duke.; Pontiac 265-301 High Energy Hydraulic Lifters
Competition Cams 8957-16
Link Bar Hydraulic Roller Lifter Set for GM LS, LSX, RHS and Warhawk
Competition Cams CL09-420-8
Magnum 215/215 Hydraulic Roller Cam and Lifter Kit for Chevrolet 262/4.3L; Mild street performance. Slight lope at idle. Stock converter, aftermarket intake and headers. 3.40 to 4.10 gears.