Filters
Competition Cams 7522-1
Magnum 8.400" Long, .080" Wall, 3/8" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 8.400" long, 3/8" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7782-16
Hi-Tech 8.950" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.950" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7947-1
Hi-Tech 210 Radius 8.050" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.050" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8310-1
Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod; With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 6.750" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.
Competition Cams 8549-16
Hi-Tech One-Piece 9.400" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 9.400" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 87-127-6
High Energy 214/214 Solid Cam for Toyota 20R/22R 4 Cylinder; Performance use. Wide powerband. Smooth idle.
Competition Cams 8561-1
Hydraulic Roller Lifter Yoke for Chrysler HEMI; This lifter "yoke" is designed to hold the hydraulic roller lifters in place, preventing them from spinning. A necessary part of an MDS delete project, each yoke holds four lifters - 4 total per engine.
Competition Cams CL12-249-4
XE Computer Control 206/212 Hydraulic Flat Cam/Lifter Kit Chevrolet Small Block; Great in throttle body, crossfire or carbureted engine and 305 TPI.
Competition Cams CL70-119-6
High Energy 210/210 Hydraulic Flat Cam/Lifter Kit for Ford 2000-2300 4 Cylinder; Power and mileage increase in low to mid RPM range. Great for highway driving.
Competition Cams K11-432-8
Xtreme Energy 230/236 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454; High performance for street cars with 2200+ stall, 9:1+ compression, headers.
Competition Cams K31-226-3
Magnum/Marine 230/230 Hydraulic Flat Cam K-Kit for Ford 221-302; Broad power. 2500+ stall, low gears, 9.5:1 compression and headers. Rough idle. Also for Off-Shore type boat. Strong performance, rough idle.
