Filters
Competition Cams 34-241-5
Xtreme Marine 234/244 Hydraulic Flat Cam for Ford 429,460; Good for jet boats with A impeller. Needs good manifold, likes headers.
Competition Cams 4100BW
Brass Washer for 4100 Small Block Chevrolet Gear Drive System; Replacement Brass Washer for #4100 Gear Drive System
Competition Cams 54-457-11
LSR Cathedral Port 223/231 Hydraulic Roller Cam for GM LS GEN III/IV; Steady power throughout broad range. Needs aftermarket airflow improvements on inlet and exhaust.
Competition Cams 619-12
Set of 12 Lash Caps for 426 HEMI w/ 5/16" Valve Stem, .190" Head Height; Set of 12 Lash Caps for 426 HEMI with 5/16" Valve Stem, .190" Head Height
Competition Cams 7178-16
Magnum 9.200" Long, .080" Wall, 3/8" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 9.200" long, 3/8" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7684-1
Magnum 7.900" Long, .080" Wall, 3/8" Diameter Pushrod; Heat-treated for guide plate compatibility then black oxide coated, this 7.900" long, 3/8" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 7842-1
High Energy 8.234" Long, 5/16" Diameter Pushrod; Exceeding OE specifications, this High Energy 8.234" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '71-'79 Oldsmobile 260-403 V8.
Competition Cams 7995-16
Hi-Tech 8.000" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.000" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8417-12
Hi-Tech 8.100" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12; Hi-Tech .105" Wall Pushrods: 5/16" Diameter, 8.100" Length
Competition Cams 8645-1
Straight 9.600" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 9.600" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 8960-2
Retro-Fit Hydraulic Roller Lifter for AMC 290-401; Engine Valve Lifter
Competition Cams CL10-203-4
Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for AMC 290-401; Best cam for 360-401 with stock converter. Works well with headers and aftermarket intake. Mild rough idle.