Filters
Competition Cams 1777-12
7 Tool Steel Retainer Set of 12, 11/32" Valve w/ 26926 Springs in Non-LS Engine; Lightweight Tool Steel Retainers: 1.320" Spring Diameter
Competition Cams 26055-16
Race Sportsman 1.585" OD Beehive Springs, 1.925" Installed Height, 16 Springs; Bottom 1.585" OD, 1.112" ID
Competition Cams 41-600-7
Classic Thumpr 227/241 Solid Flat Cam for Flathead Ford 239/255; Street performance, choppy/thumping idle.
Competition Cams 6200TB2
81-Tooth Timing Belt for 6200 Chevrolet Big Block Belt Drive System
Competition Cams 7182-16
Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod Set; Heat-treated for guide plate compatibility then black oxide coated, these 9.750" long, 3/8" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.
Competition Cams 800-16
Performance Series EDM Solid Lifter Set Cadillac, Chevrolet, Olds and Pontiac.; These Performance Series solid lifters feature a precision-ground crown radius and finish, along with an EDM oiling hole, perfect for high-end street and race engines with higher spring pressures. For .842" lifter diameter applications.
Competition Cams 8460-1
Hi-Tech One-Piece 7.800" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 7.800" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8649-16
Straight 9.800" Long, .165" Wall, 7/16" Diameter Pushrod Set; These 7/16" diameter, .165" wall pushrods incorporate technology developed in NHRA/NASCAR engines. 9.800" long with a 5/16" ball end and 210 radius, these pushrods handle extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 89842C-16
DLC Coated Tool Steel Solid Lifter Set for Chevrolet; Constructed from tool steel, which is lighter than standard steel, these DLC-coated lifters fit .842" diameter Chevrolet applications with steel camshafts.
Competition Cams K33-432-11
Xtreme Energy 230/236 K-Kit for Ford 352-428 FE; High performance for street cars with 2200+ stall, 9:1+ compression, headers.
Competition Cams CL20-601-4
Mutha' Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit for Chrysler 273-360; High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Competition Cams K01-421-8
XE 236/242 Hydraulic Roller K-Kit Chevrolet Big Block GEN VI; Street/strip applications with 10:1+ compression and 2800+ stall. Rough idle, needs good intake and headers.
