Filters
Competition Cams 26089-16
Race Endurance 1.565" OD Dual Springs, 2.000" Installed Height, 16 Springs
Competition Cams 31-414-3
Magnum 224/224 Hydraulic Flat Cam for Ford 221-302; Performance use. Best with mild converter, headers, 9:1 compression and lower gears. Rough idle.
Competition Cams 34-336-4
Magnum/Marine 244/244 Hydraulic Flat Cam for Ford 429,460; Street/strip use. Good power. 3000+ stall and raised compression. Very rough idle. Jet boat with B impeller. Flat bottom or hydro for skiing or performance. Good power. 3000+ stall and raised compression. Very rough idle.
Competition Cams 42-220-4
Xtreme Energy 206/212 Hydraulic Flat for Oldsmobile 260-455; Very strong torque, excellent mileage, smooth idle.
Competition Cams 621-1
Hardened Lash Cap w/ 11/32" Valve Stem, .210" Head Height; Qty. 1 Hardened Lash Cap: .210" Overall Head Height
Competition Cams 722-16
10 Degree Titanium Retainer Set of 16 for 1.625" OD Triple Springs; Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 10 degree retainers fit engines with 1.625" OD triple valve springs.
Competition Cams 7861-12
High Energy 9.677" Long, 5/16" Diameter Pushrod Set of 12; Exceeding OE specifications, this High Energy 9.677" long pushrod set works perfectly with High Energy or Magnum rockers. Factory length for Chevrolet '62-'84 194-250 6 cylinder.
Competition Cams 8462-16
Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.380" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8652-1
Straight 9.950" Long, .165" Wall, 7/16" Diameter Pushrod; This 7/16" diameter, .165" wall pushrod incorporates technology developed in NHRA/NASCAR engines. 9.950" long with a 5/16" ball end and 210 radius, this pushrod handles extreme valvetrain setups better than standard 1000 series pushrods.
Competition Cams 89875H-16
Tool Steel Solid Lifter Set w/ .012" EDM Oiling Hole for Ford; Constructed from tool steel, which is lighter than standard steel, these non-coated lifters fit .875" diameter Ford applications with cast iron camshafts. Features an EDM oiling hole for additional oiling to camshaft lobe.
Competition Cams CL20-702-9
Magnum 262/262 Solid Roller Cam and Lifter Kit for Chrysler 273-360; Max effort street roller. 10:1+ compression with 750 CFM carb on aftermarket intake. 4.30-4.88 gear suggested with 4000-4500+ converter. Headers.
