Filters
Competition Cams 26095-4
Race Street 1.590" OD Beehive Springs, 2.000" Installed Height, 4 Springs; Beehive Valve Spring (4) 1.589"
Competition Cams 34-341-4
Magnum 236/236 Solid Flat Cam for Ford 429,460; Good for street machine with 2000+ converter and headers. 9:1+ compression. Mild rough idle.
Competition Cams 42-225-4
Xtreme Energy 240/246 Hydraulic Flat Cam for Oldsmobile 260-455; Street/strip, needs 9:1+ compression. 2800+ stall, headers, gears, rough idle.
Competition Cams 4737-1
Valve Spring Shim - 1.437" OD, .645" ID .015" Thickness; Ensure the equal installed height of all of your valve springs with this 1.437" outer diameter, .015" thick, heat-treated spring shim.
Competition Cams 54-478-11
LSR Centrifugal Blower 235/251 Hydraulic Roller Cam for GM LS GEN III/IV; Good high RPM power when used with a centrifugal blower.
Competition Cams 622-12
Set of 12 Hardened Lash Caps w/ 3/8" Valve Stem, .190" Head Height; Set of 12 Hardened Lash Caps: .190" Overall Head Height
Competition Cams 7864-1
High Energy 9.954" Long, 5/16" Diameter Pushrod; Exceeding OE specifications, this High Energy 9.954" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '60-'80 Chrysler 198-225 6 cylinder with a solid cam.
Competition Cams 8106-LR
Lifter Guide for Factory Roller Chevrolet V6 w/ Balance Shaft
Competition Cams 8464-16
Hi-Tech One-Piece 8.550" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.550" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8659-16
Dual Taper 8.050" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 8.050" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 89904H-1
Tool Steel Solid Lifter w/ .012" EDM Oiling Hole for Chrysler; Constructed from tool steel, which is lighter than standard steel, this non-coated lifter fits .904" diameter Chrysler applications with cast iron camshafts. Features an EDM oiling hole for additional oiling to camshaft lobe.
Competition Cams CL11-219-4
Magnum 248/248 Solid Flat Cam and Lifter Kit for Chevrolet Big Block 396-454; Good for street/strip cars. 3000+ stall or 4 speed. 10:1+ compression, headers and low gears. Very rough idle.
