Filters
Competition Cams 12-612-5
Puller/Mud Race/Drag/O-Track 265/276 Solid Flat Cam for Chevrolet Small Block; Good for 377-406 engine to run high RPM. Requires upgraded cylinder heads and manifold. 327-350, 4500+ stall, good power. 11:1 compression. Good for 1/2 to 5/8 mile track with light car, large engine.
Competition Cams 1418-1
Magnum Roller 1.6 Ratio Rocker Arm for '88+ Chevrolet V6/SBC w/ 3/8" Stud; Perfect for street performance, our 8620 chromemoly steel Magnum roller tip rockers can handle up to 350 lbs of pressure. This 1418 self-aligning rocker features a 1.6 ratio for 3/8" stud '88+ Chevrolet 200-262 V6 and 265-400 Small Block.
Competition Cams 1801-8
Ultra Pro Magnum XD Rocker Set of 8 w/ 1.5 Ratio for Chevrolet w/ 3/8" Stud; Chevy 3/8" Stud/1.5" Ratio, XD Rocker Arms - Set of 8
Competition Cams 20-635-5
Drag Race/Oval Track 252/262 Solid Flat Cam for Chrysler 273-360; 3500+ converter in 360 or 3800+ in 340. Needs single plane intake and 10.5:1 compression. Excellent low end and mid-range torque. Good short track cam for 340 or 360. Will turn more RPM in 340. Needs 10:1 compression and 4 BBL carb.
Competition Cams 26097-1
Race Endurance 1.551" OD Dual Spring, 2.000" Installed Height, 1 Spring; Elite Race Dual Valve Springs: 1.539" OD Outer, .731" ID Inner
Competition Cams 34-342-4
Magnum 248/248 Solid Flat Cam for Ford 429,460; Good street/strip cam. Excellent power. 3000+ stall with manifolds and 9.5:1+ compression. Radical idle.
Competition Cams 42-226-4
Xtreme Energy 250/256 Hydraulic Flat Cam for Oldsmobile 260-455; Pro Street/bracket, good intake, headers, gear, 3200+ stall.
Competition Cams 4737-100
Valve Spring Shims 100 - 1.437" OD, .645" ID .015" Thick
Competition Cams 7230-16
Race Sportsman 1.332" OD Conical Springs, 1.900" Installed Height, 16 Springs; Conical Valve Springs 145 @ 1.900" / 495 @ 1.225"
Competition Cams 7864-12
High Energy 9.954" Long, 5/16" Diameter Pushrod Set of 12; Exceeding OE specifications, this High Energy 9.954" long pushrod set works perfectly with High Energy or Magnum rockers. Factory length for '60-'80 Chrysler 198-225 6 cylinder with a solid cam.
Competition Cams 8465-1
Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 8.600" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8660-1
Dual Taper 8.100" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 8.100" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
