Filters
Competition Cams 8663-16
Dual Taper 8.300" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 8.300" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams CL11-240-4
Xtreme Marine 234/244 Hydraulic Flat Cam/Lifter Kit Chevrolet Big Block 396-454; Jet w/ A impeller, needs improved intake, likes headers.
Competition Cams CL21-226-4
Xtreme Energy 250/256 Hydraulic Flat Cam and Lifter Kit for Chrysler 383-440; Pro Street/bracket, good intake, headers, gear, 3200+ stall.
Competition Cams CL38-101-4
High Energy 200/200 Solid Flat Cam and Lifter Kit for Ford 2800 OHV 6 Cylinder; Good cam for OEM replacement or rebuild. Low RPM torque with good economy. Very smooth idle.
Competition Cams K12-773-8
Xtreme Energy 254/260 Solid Roller Cam K-Kit for Chevrolet Small Block; Best for Pro Street. Needs good intake and exhaust, 11:1+ compression and 3500 stall.
Competition Cams K35-239-3
Xtreme 4x4 218/226 Hydraulic Flat Cam K-Kit for Ford 351W; Good torque for 4x4 with aftermarket intake and headers. Excellent mid-range, works with lower gears.
.jpg?fit=max&w=200&auto=compress,format)
Competition Cams 89311-2
Evolution HCT Lifters offer quite operation expected from a hydraulic tappet and higher RPM demand by many of today's modern engine builds. Most consistent, highest performing, and quietest hydraulic lifter on the market.
Competition Cams 612-12
Set of 12 - 10 Degree, 3/8", Single Groove Locks w/ Lash Cap Recess; 3/8", Single Groove Lock with Lash Cap Recess - Set of 12
Competition Cams EVL-3010SP
Harley Big Twin 234/234 at .053 SP Kit.; Good stock replacement for 80c.i. engines. Good low end torque and mid-range in heavy or light bikes.
Competition Cams MK54-703-11
Stage 2 Thumpr Master Cam Kit for GEN IV LS 4.8/5.3/6.0L Trucks; The Stage 2 Thumpr Master Cam Kit for LS GEN IV 5.3-6.0L provides an awesome idle lope in modified 5.3L & 6.0L trucks. Includes lifters, timing set, pushrods, dual springs, retainers, locks, spring seats and valve seals.
Competition Cams 10-604-5
Thumpr 243/257 Hydraulic Flat Cam for AMC 290-401; Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
