Filters
Competition Cams 501-1
1 O-Ring Valve Seal for Stock Guide Size, 11/32" Valve Stem; (1) O-Ring Valve Seals: for 11/32" Valves and OE-Size Guides
Competition Cams 624-512-13
XFI AFM 216/228 D, 214/226 N Hydraulic Roller Cam for GM LT1 GEN V; Excellent responsiveness and mid-range power with across the board gains with AFM enabled.
Competition Cams 727-16
10 Degree Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs; Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 10 degree retainers fit engines with 1.500"-1.550" OD valve springs such as our 26094, 955 and 943 springs.
Competition Cams 7732-16
Hi-Tech 210 Radius 7.900" Long, .080" Wall, 3/8" Diameter Pushrod Set; For high lift applications with pushrod to lifter seat interference or rockers that feature a cup type adjuster, we have the solution. These 3/8", 7.900" long Hi-Tech pushrods have a 210 degree tip radius for greater load bearing surface.
Competition Cams 787-16
7 Degree Steel Retainer Set of 16 11/32" Valve w/ 26915/26918 Beehive Springs; Precision machined from chromemoly steel then black oxided, these 7 degree retainers are designed specifically for 11/32" valve applications with our 26915/26918 Beehive valve springs.
Competition Cams 813-16
Solid Lifters, SB/BB Chevy V8 and Cadillac 472-500; Designed and manufactured to the tightest tolerances, these solid lifters for Cadillac 472-500 and Chevrolet Small/Big Block feature an exactly milled oil meter band as well as precisely ground lifter faces.
Competition Cams 8469-1
Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 9.250" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8664-16
Dual Taper 8.350" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 8.350" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams CL11-243-4
Xtreme 4x4 234/244 Hydraulic Flat Cam and Lifter Kit Chevrolet Big Block 396-454; Good top end power, needs good intake, headers and gears. Use with 9.5:1 compression and 2500+ stall.
Competition Cams CL21-228-4
Xtreme Energy HI-LIFT 241/247 Hydraulic Flat Cam and Lifter Kit Chrysler 383-440; Hot street cam. 10:1 compression, lower gears, headers and 3000+ stall. Strong mid-range with a rough idle.
Competition Cams CL38-241-4
High Energy 220/220 Solid Flat Cam and Lifter Kit for Ford 2800 OHV 6 Cylinder; Moderate performance camshaft. Strong in mid-range RPM. Noticeable idle.
