Filters
Competition Cams 1805-1
Ultra Pro Magnum XD Rocker w/ 1.6 Ratio for Chevrolet V6 and SBC w/ 7/16" Stud; Machined from 8650 steel with a billet pushrod seat insert, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. This 1805 rocker features a 1.6 ratio for use with 7/16" stud Chevrolet V6 and 265-400 Small Block.
Competition Cams 4742-100
Valve Spring Shims 100 - 1.250" OD, .814" ID .030" Thick
Competition Cams 5456
Cam Phaser Limiter Kit for '07-'08 GM GEN IV LS and '14+ GM GEN V LT1; Including our 5454 spring compressor, 5455 spring lock tool and the 5457 cam phaser limiter plug, this kit has everything that you need to limit the cam timing of your '07-'08 GEN IV and '14+ LT1 to 22 degrees.
Competition Cams 624-536-13
XFI AFM 224/236 D, 222/234 N Hydraulic Roller Cam for GM LT1 GEN V; Outstanding top end power in modified LT1, AFM applications, with only slight low end losses if properly programmed.
Competition Cams 728-1
10 Degree Titanium Retainer for 1.250" OD Single Spring; Precision machined from 6AL4V titanium, this retainer features better material consistency and bullet proof durability. This 10 degree retainer fits engines with a 1.250" OD valve spring such as our 980, 981 and 941 springs.
Competition Cams 7733-16
Hi-Tech 210 Radius 7.950" Long, .080" Wall, 3/8" Diameter Pushrod Set; For high lift applications with pushrod to lifter seat interference or rockers that feature a cup type adjuster, we have the solution. These 3/8", 7.950" long Hi-Tech pushrods have a 210 degree tip radius for greater load bearing surface.
Competition Cams 788-1
7 Degree Titanium Retainer for 11/32" Valve Stem w/ 26915/26918 Beehive Spring; Precision machined from 6AL4V titanium, this retainer features better material consistency and bullet proof durability. This 7 degree retainer fits 11/32" valve engines with our 26915/26918 Beehive valve spring.
Competition Cams 8135-CS
Lifter Retainer/Spider Tray Bolts for Retro-Fit Roller 289-302, 351W/C/M-400M
Competition Cams 8469-8
Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set of 8; Radius .135" Wall Pushrod: 3/8" Diameter, 9.250" Length
Competition Cams 8665-16
Dual Taper 8.400" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 8.400" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams CL11-246-3
XE 230/236 Hydraulic Flat Cam/Lifter Kit Chevrolet Big Block 396-454; High performance street, very strong mid-range, with headers and 2200+ stall.
