Filters
Competition Cams 5493CPG
Adjustable Phaser Limiters for '11-'14 Ford 5.0 Coyote Modular 4 Valve; This limiter kit for '11-'14 Ford 5.0L Coyote limits the cam phasing to 25 crank degrees for camshafts with more duration and lift. By keeping VVT while adding larger camshafts, more power is gained without sacrificing bottom end torque.
Competition Cams 798-16
7 Degree Titanium Retainer Set 100 for Ford 4.6L 4V w/ 26123 Beehive Springs; 7°
Competition Cams EVL-3030
Harley Davidson Big Twin Evolution 240/240 at .053.; Good in 80-88c.i. engines with up to 10:1 compression. More mid-range and upper end power.
Competition Cams 201-302-17
HRT No Springs Required Stage 1 Cam for '11+ Dodge 6.4L HEMI; No Springs Required (NSR) Stage 1 Grind for 6.4L Gen. IV Hemi. Awesome across the board power increases in NSR cam for 6.4L ONLY!
Competition Cams 106200
Xtreme RPM 234/230 Hydraulic Roller Cams for Ford 4.6/5.4/5.8L Modular 4 Valve; Street and strip performance. Needs lower gears, exhaust upgrades, larger throttle body and mass air, bigger fuel injectors and a 2200+ stall with automatics. Requires custom tuning. Rough idle.
Competition Cams 11-752-14
Drag Race 4/7 Swap 285/300 Solid Roller Cam for Chevrolet Big Block 396-454; Large cubic inch Quick 16, Eliminator with high ratio rockers and Fast Bracket, 1.8 and 1.7.
Competition Cams 1451-1
Magnum Roller 1.52 Ratio Rocker Arm for Pontiac 265-455 w/ 7/16" Stud; Perfect for street performance, our 8620 chromemoly steel Magnum roller tip rockers can handle up to 350 lbs of pressure. This 1451 rocker features a 1.52 ratio for 7/16" stud Pontiac 265-455.
Competition Cams 1805-16
Ultra Pro Magnum XD Rocker Set w/ 1.6 Ratio for Chevrolet SBC w/ 7/16" Stud; Machined from 8650 steel with a billet pushrod seat insert, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. These 1804 rockers feature a 1.6 ratio for use with 7/16" stud Chevrolet 265-400 Small Block.
Competition Cams 20-716-9
Drag Race 281/288 Solid Roller Cam for Chrysler 273-360; Good Super Gas, Super Comp or Fast Bracket cam, medium to large cubic inch engines with 6000+ converter.
Competition Cams 26123-1
Performance Street 1.105" OD Beehive Spring, 1.470" Installed Height, 1 Spring; Bottom 1.105" OD, .742" ID
Competition Cams 4743-1
Valve Spring Shim - 1.437" OD, .645" ID .030" Thickness; Ensure the equal installed height of all of your valve springs with this 1.437" outer diameter, .030" thick, heat-treated spring shim.
Competition Cams 502-1
1 Umbrella Valve Seal for Stock Guide Size, 11/32" Valve Stem; Typically requiring no machine work, our 502 umbrella seal is a great option for stock guide applications with 11/32" valves needing a seal replacement.
