Filters
Competition Cams 1452-1
Magnum Roller 1.65 Ratio Rocker Arm for Pontiac 265-455 w/ 7/16" Stud; Perfect for street performance, our 8620 chromemoly steel Magnum roller tip rockers can handle up to 350 lbs of pressure. This 1452 rocker features a 1.65 ratio for 7/16" stud Pontiac 265-455.
Competition Cams 1806-1
Ultra Pro Magnum XD Rocker w/ 1.65 Ratio for Chevrolet V6 and SBC w/ 7/16" Stud; Machined from 8650 steel with a billet pushrod seat, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. This 1806 rocker features a 1.65 ratio for use with 7/16" stud Chevrolet V6 and 265-400 Small Block.
Competition Cams 20-719-9
Oval Track/Drag Race 263/270 Solid Roller Cam for Chrysler 273-360; Good all around bracket cam. 4200+ stall in 360 or 4500+ stall in 340, 11.5:1 compression.
Competition Cams 26125-1
Race Street 1.101" OD Beehive Spring, 1.640" Installed Height, 1 Spring; Bottom 1.101" OD, .738" ID
Competition Cams 3146KT
Adjustable Double Roller Timing Set for 265-400 SBC and Olds Rocket; With a pre-stretched, heat-treated, double roller chain, billet gears, an infinitely adjustable cam gear and 3 key crank gear, this adjustable timing set for SBC/Olds Rocket w/ raised cam location is ideal for street and race.
Competition Cams 34-710-9
Magnum 255/255 Solid Roller Cam for Ford 429,460; Ultimate Pro Street cam 4000+ stall/4 speed, 11:1+ compression, radical idle.
Competition Cams 4744-1
Valve Spring Shim - 1.480" OD, .765" ID .030" Thickness; Ensure the equal installed height of all of your valve springs with this 1.480" outer diameter, .030" thick, heat-treated spring shim.
Competition Cams 54-600-11
Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV; High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle.
Competition Cams 730-1
10 Degree Titanium Retainer for 1.437"-1.500" OD Double Springs; Precision machined from 6AL4V titanium, this retainer features better material consistency and bullet proof durability. This 10 degree retainer fits engines with a 1.437"-1.500" OD valve spring.
Competition Cams 7736-1
Hi-Tech 210 Radius 8.100" Long, .080" Wall, 3/8" Diameter Pushrod; For high lift applications with pushrod to lifter seat interference or rockers that feature a cup type adjuster, we have the solution. This 3/8", 8.100" long Hi-Tech pushrod has a 210 degree tip radius for a greater load bearing surface.
Competition Cams 7883-1
High Energy 8.575" Long, 5/16" Diameter Pushrod; Exceeding OE specifications, this High Energy 8.575" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '68-'78 Chrysler 383-400 with non-adjustable rockers.
