Filters
Competition Cams 5622CPG
Cam Install Kit for 3-Bolt GM LS7 and LS9; Including a front cover gasket, crank seal, LS7/LS9-specific harmonic balancer bolt, water pump gaskets, EGR seal, as well as a cam plate and 3 bolts, the COMP cam install kit includes everything needed for an LS7/LS9 cam swap.
Competition Cams GT500ST-KIT
.520" Lift GT500 Beehive Spring Kit w/ Chromemoly Steel Retainers; .520" Lift Beehive Spring Kit with Chromemoly Steel Retainers for Ford GT500
Competition Cams EVL-5015
Harley Davidson Big Twin Evloution 252/252 at .053.; Great mid and upper end power in modified 80-88c.i. Increased compression, pipes, and carb work.
Competition Cams 1071-KIT
Aluminum Shaft Mount 1.5 Rocker Kit for Chrysler 383-440; Constructed from an aluminum alloy, this 1.5 ratio shaft-mount rocker system for Chrysler 383-440 has a tensile strength of 80,000, perfect for any race applications.
Competition Cams 12-651-5
Oval Track 248/250 Solid Flat Cam for Chevrolet Small Block; 1/4-3/8 fast track. 327-358c.i., 9:1 compression. 2 BBL with good intake and exhaust.
Competition Cams 20-740-9
Xtreme Energy 248/254 Solid Roller Cam for Chrysler 273-360; 3300+ stall with 10:1 compression. Strong top end with a racey idle.
Competition Cams 4745-16
Valve Spring Shim Kit - 1.500" OD, .645" ID .030" Thickness; Ensure the equal installed height of all of your valve springs with these 1.500" outer diameter, .030" thick, heat-treated spring shims.
Competition Cams 504-1
1 Umbrella Valve Seal for Stock Guide Size, 3/8" Valve Stem; Typically requiring no machine work, our 504 umbrella seal is a great option for stock guide applications with 3/8" valves needing a seal replacement.
Competition Cams 5463-KIT
GM LS 3-Bolt Bronze Cam Thrust Plate/Retaining Plate Kit; This kit builds on our 5400TP-KIT bronze thrust plate kit by adding a camshaft retaining plate and camshaft bolts. The retaining plate included in this kit features bendable tabs which stop the bolts from backing out of the camshaft.
Competition Cams 628-16
Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks; 16 Pairs Machined Steel Race Locks: 1 Groove, 7 Degree Angle, 5/16" Stem Size
Competition Cams 7738-16
Hi-Tech 210 Radius 8.550" Long, .080" Wall, 3/8" Diameter Pushrod Set; For high lift applications with pushrod to lifter seat interference or rockers that feature a cup type adjuster, we have the solution. These 3/8", 8.550" long Hi-Tech pushrods have a 210 degree tip radius for greater load bearing surface.
