Filters
Competition Cams 8551-16
Hi-Tech One-Piece 8.250" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.250" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8714-16
Hi-Tech 10.450" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 10.450" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 955-1
Race Endurance 1.565" OD Dual Spring, 2.000" Installed Height, 1 Spring; Engine Valve Spring
Competition Cams 954-4
2 SPRING ASSEMBLY, 1.536"; These springs work excellently in higher rpm street/strip and racing applications that have aggressive lobe profiles.
Competition Cams CL12-268-4
XE Computer Control 224/230 Hydraulic Flat Cam/Lifter Kit Chevrolet Small Block; Best cam for modified 350 TPI with improved chip, injectors, plenum, runners and exhaust.
Competition Cams CL33-224-3
High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for Ford 352-428; Good upgrade for factory performance cams in 390-428. Noticeable idle.
Competition Cams K11-450-8
Magnum 232/232 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454; For hot street machines. 2500+ stall, 9.5:1+ compression. Best with headers and aluminum intake. Rough idle.
Competition Cams K31-246-3
Xtreme Energy 230/236 Hydraulic Flat Cam K-Kit for Ford 221-302; Very strong torque and throttle response, 2500+ stall.
Competition Cams 33-782-11
Magnum 262/262 Solid Roller Cam for Ford 352-428; The ultimate street cam. 3500+ stall or manual. 10.5:1 compression ratio. 4.10 gear or lower. Radical idle.
Competition Cams SK34-224-4
High Energy 206/206 Hydraulic Flat Cam SK-Kit for Ford 429,460; Performance upgrade for stock cam. Strong torque and mileage. Very smooth idle. Great for family sedans.
Competition Cams 31-1000CPG
Retro-Fit Hydraulic Roller Installation Kit for Ford 289-351W, 351C, 351-400M; Our hydraulic roller lifter installation kit provides a complete, convenient solution for the retrofitting of hydraulic roller lifters into Ford 289-351W/C-400M with factory flat tappet camshafts.
Competition Cams 42030510901
PUSHROD, XTREME RACE G2 8.275" LENGTH 5/16" DIA .107" WALL 210 RADIUS SINGLE; Xtreme Race G2 Pushrod, 8.275 Inch Length, 0.3125 Diameter, 210 Radius, 4130 Chromoly, Single
