Filters
Competition Cams 26-600-7
Classic Thumpr 227/241 Hydraulic Flat Cam for Chrysler 392 HEMI; High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
Competition Cams 34-771-9
Xtreme Energy 242/248 Solid Roller Cam for Ford 429,460; Best in street machines, 2800 stall, 10:1+ compression, 3.73-3.90 gears.
Competition Cams 42-601-5
Mutha' Thumpr 234/249 Hydraulic Flat Cam for Oldsmobile 260-455; High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Competition Cams 4746-16
Valve Spring Shim Kit - 1.640" OD, .635" ID .030" Thickness; Ensure the equal installed height of all of your valve springs with these 1.640" outer diameter, .030" thick, heat-treated spring shims.
Competition Cams 505-1
1 PTFE Valve Seal for .530" Guide Size, 3/8" Valve Stem; COMP's Positive Stop PTFE valve seals offer more clearance for dual springs with better sealing than o-ring or umbrella seals. This 505 seal has a .630" outer diameter and fits applications with 3/8" valves and .530" OD valve guides.
Competition Cams 629-16
Machined Steel Set of 16 - 7 Degree, 5mm, Single Groove Race Locks; 16 Pairs Machined Steel Race Locks: 1 Groove, 7 Degree Angle, 5.5mm Stem Size
Competition Cams 7740-1
Hi-Tech 8.175" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.175" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8474-1
Hi-Tech One-Piece 7.950" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 7.950" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8671-16
Dual Taper 8.700" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 8.700" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 9132
Replacement Double Timing Chain for LS Timing Set; This double chain replaces the chain that came with our timing sets for RHS/LSX raised cam blocks.
Competition Cams CL11-405-5
Blower/Turbo 255/266 Solid Flat Cam and Lifter Kit Chevrolet Big Block 396-454; Good for street and mild strip use with 671 or larger blower.
Competition Cams K42-423-11
Xtreme Energy 224/230 Hydraulic Roller K-Kit for Oldsmobile 260-455; Great for street machines, needs headers, low gears, and 2200+ stall.
