Filters
Competition Cams 146-458-11
LSR 227/243 Hydraulic Roller Cam for GM GEN IV w/o VVT or AFM; Good street/strip camshaft with wide range.
Competition Cams 1810-16
Ultra Pro Magnum XD Rocker Set w/ 1.5 Ratio for Chevrolet SBC w/ 1/2" Stud; Machined from 8650 steel with a billet pushrod seat insert, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. These 1810 rockers feature a 1.5 ratio for use with 1/2" stud Chevrolet 265-400 Small Block.
Competition Cams 26915-12
Performance Street 1.290" OD Beehive Spring, 1.800" Installed Height, 12 Springs; Beehive Valve Springs: Top 1.055" OD, .650" ID
Competition Cams 4749-100
Valve Spring Shims 100 - 1.437" OD, .645" ID .060" Thickness
Competition Cams 5496
LS/LS6 Front Cover for RHS GM Block; Designed for performance applications, this cover accommodates OE and aftermarket LS1, 2, 3 and 6. With a provision for a timing pointer, cam sensor or crank trigger, our cover fits double roller timing sets and aftermarket oil pumps.
Competition Cams 630-100
Set of 100 - 10 Degree 11/32 Single Groove Locks w/ Recess -.050" Height
Competition Cams 7741-16
Hi-Tech 8.225" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.225" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7906-16
Hi-Tech 8.600" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.600" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8475-16
Hi-Tech One-Piece 8.000" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.000" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8673-1
Dual Taper 8.800" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 8.800" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 91-600-5
Classic Thumpr 227/241 Hydraulic Flat Cam for Buick 364, 401, 425 Nailhead; Performance street with strong torque, stock converter ok. Choppy/thumping idle.
