Filters
Competition Cams K35-414-3
Magnum 224/224 Hydraulic Flat Cam K-Kit for Ford 351W; Good for daily driven performance cars. Largest cam for stock converter. Lower gears. Mild rough ride.
Competition Cams SK10-211-4
Magnum 253/253 Hydraulic Flat Cam SK-Kit for AMC 290-401; Excellent for Pro Street or mild bracket racing. 3500+ stall, 10.5:1 compression, 4.10 gear or lower. Radical idle.
Competition Cams SK21-306-4
Magnum 224/224 Hydraulic Flat Cam SK-Kit for Chrysler 383-440; Great replacement for 440 with 700-800 CFM or six pack. Noticeable idle in 383. Slight idle in 440. Largest cam w/ stock converter.
Competition Cams SK68-239-4
Xtreme 4X4 218/226 Hydraulic Flat Cam SK-Kit for AMC/Jeep 199-258/4.0L; Good mid to upper torque, needs increased compression, headers and gears.
Competition Cams 1076-KIT
Aluminum Shaft Mount 1.6 Rocker Kit for Chrysler 273-360; Constructed of a strong aluminum alloy, this 1.6 ratio shaft-mount rocker system for Chrysler 273-360 is a good choice for any race application.
Competition Cams 12-658-5
Oval Track 260/266 Solid Flat Cam for Chevrolet Small Block; 3/8-1/2 tight. 360+c.i., 12:1+ compression. 4 BBL with good intake and exhaust.
Competition Cams 20-811-9
Xtreme Energy 224/230 Hydraulic Roller Cam for Chrysler 273-360; 3.55-4.10 gears, 2200+ stall, 9:1 compression, headers, high performance street.
Competition Cams 4751-1
Valve Spring Shim - 1.500" OD, .645" ID .060" Thickness; Ensure the equal installed height of all of your valve springs with this 1.500" outer diameter, .060" thick, heat-treated spring shim.
Competition Cams 632-12
Set of 12 - 10 Degree, 8mm, Single Groove Locks for LS1/LS6 Bead Lock; 8mm, Single Groove Lock for LS1/LS6 Bead Lock - Set of 12
Competition Cams 735-1
10 Degree Titanium Retainer for 1.625" OD Triple Springs, +.050" Height over 739; Precision machined from 6AL4V titanium, this retainer features better material consistency and bullet proof durability. This 10 degree retainer fits engines with a 1.625" OD triple valve spring. Adds 0.050" installed height over 739.
Competition Cams 7743-1
Hi-Tech 8.350" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.350" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 7910-1
Hi-Tech 8.850" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.850" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
