Filters
Competition Cams 1477-1
Trunnion-Upgraded 1.7 Ratio Rocker Arm for GM LS1; With upgraded trunnions that are secured by snap rings along with a black oxide finish, our upgraded OE LS rocker offers higher lift capacity than stock. Featuring a 1.7 ratio, this1477 rocker fits LS1, LS2 and LS6 engines.
Competition Cams 1077-1
Ultra Pro Magnum Rocker Arm Shaft for 1621 Chrysler 383-440 B/RB Shaft Kit; The 1077-1 shaft replaces a shaft that comes with our 1621 Chrysler 383-440 B/RB shaft rocker system.
Competition Cams 119100
Quiktyme 202/202 Hydraulic Cams for Mitsubishi 4G63 EVO VIII 2.0L; 264+c.i. works well with stock engine and turbo. Responds well to bolt-ons and pulls strong throughout RPM band.
Competition Cams 12-659-5
Oval Track 264/270 Solid Flat Cam for Chevrolet Small Block; 3/8-1/2 fast. 360+c.i., 12:1+ compression. 4 BBL with good intake and exhaust.
Competition Cams 20-812-9
Xtreme Energy 230/236 Hydraulic Roller Cam for Chrysler 273-360; 3.91+ gears, 9.5:1 compression, 2500+ stall, aftermarket intake, headers.
Competition Cams 26918CS-KIT
GM LS Beehive Valve Spring Kit w/ Chromemoly Steel Retainers, .625" Max Lift; Including properly matched quality beehive valve springs, 7 degree locks, viton seals, hardened seats and chromemoly steel retainers, this spring kit is ready to bolt onto LS heads with aggressive cams with up to .625" valve lift.
Competition Cams 4751-100
Valve Spring Shims 100 - 1.500" OD, .645" ID .060" Thick
Competition Cams 735-16
10 Degree Titanium Retainers for 1.625" OD Triple Springs,+.050" Height over 739; Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 10 degree retainers fit engines with 1.625" OD triple valve springs. Adds 0.050" installed height over 739.
Competition Cams 7743-16
Hi-Tech 8.350" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.350" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7910-16
Hi-Tech 8.850" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.850" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 821-12
Solid Lifter Set of 12 for Chrysler 170-255 V6; Designed and manufactured to the tightest tolerances, these solid lifters for Chrysler 170-255 6 Cylinder feature an exactly milled oil meter band as well as precisely ground lifter faces.
Competition Cams 8478-16
Hi-Tech One-Piece 8.100" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.100" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
