Filters
Competition Cams K20-228-4
Xtreme Energy HI-LIFT 241/247 Hydraulic Flat Cam K-Kit for Chrysler 273-360; Serious street/strip cam. Strong mid-range and upper RPM power. Hi-lift design to take advantage of ported heads and single plane intake, 3000+ stall with 9.5:1 compression.
Competition Cams 13702TL-KIT
Trunnion Upgrade Kit w/ Installation Tool for GM LS1/LS2/LS3/LS6 Rocker Arms; Our trunnion upgrade kit converts a stock LS series rocker arm into a captured trunnion for increased stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with included 54702-TL tool.
Competition Cams SK69-246-4
High Energy 218/218 Hydraulic Flat Cam SK-Kit for Buick 181-252 Even Fire V6; Performance cam for the street. Mild choppy idle. Likes lower gears.
Competition Cams 4641-1
ID Spring Locator - 1.540" OD, .520" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4641 features a 1.540" OD and a .520" ID that works well with our 26947 dual valve springs.
Competition Cams 1079-1
Rocker Shaft for 1622 Chrysler 273-360 Ultra Pro Magnum Shaft Kit; The 1079-1 shaft replaces the shaft that comes with our 1622 Chrysler 273-360 shaft rocker system.
Competition Cams 1210-2
High Energy Rocker w/ 1.6 Ratio for '74-'79 AMC w/ Pedestal Mount; High Energy Steel Rocker Arms for AMC
Competition Cams 12-661-47
Xtreme Energy 4/7 Swap 240/246 Hydraulic Flat Cam for Chevrolet Small Block; Street/strip, 2800+ stall, needs headers and gear, rough idle.
Competition Cams 1817-8
Ultra Pro Magnum XD Rocker Set of 8 w/ 1.7 Ratio for Chevrolet SBC w/ 7/16" Stud; Chevrolet, 7/16" Stud/1.7" Ratio, XD Rocker Arms - Set of 8
Competition Cams 3172KT
Adjustable Single Chain Timing Set for 3-Bolt, 4 Pole, 58X GM LS; Featuring a pre-stretched, heat-treated, single chain, billet gears, an infinitely adjustable cam gear and 3 key crank gear, this adjustable timing set for Chevrolet 3-bolt, 4 pole, 58X GM LS is ideal for street and race applications.
Competition Cams 4752-16
Valve Spring Shim Kit - 1.640" OD, .650" ID .060" Thickness; Ensure the equal installed height of all of your valve springs with these 1.640" outer diameter, .060" thick, heat-treated spring shims.
Competition Cams 636-1
Titanium 8 Degree, 11/32", Single Groove Race Lock; Titanium Valve Locks: Super 7 (8 Degree Angle), 11/32" Stem Size