Refine Results

Reset
Filters

Browse Catalog

7,059 results
Retail View

Competition Cams 7950-1

Hi-Tech 7.350" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 7.350" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.

Log in for inventory

Competition Cams 8312-1

Hi-Tech Oil Restricting 6.850" Long, .080" Wall, 5/16" Diameter Pushrod; With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 6.850" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

Log in for inventory

Competition Cams 857-16

Retro-Fit Hydraulic Roller Lifter Set for Oldsmobile and Pontiac V8

Log in for inventory

Competition Cams 8715-16

Hi-Tech 10.500" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 10.500" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.

Log in for inventory

Competition Cams 955-16

Race Endurance 1.565" OD Dual Springs, 2.000" Installed Height, 16 Springs; Engine Valve Spring Kit

Log in for inventory

Competition Cams CL33-230-4

Magnum 2230/230 Hydraulic Flat Cam and Lifter Kit for Ford 352-428; Works best in street machines with 2000+ stall, lower gears and headers. Rough idle.

Log in for inventory

Competition Cams CL83-200-4

High Energy 206/206 Hydraulic Flat CL Kit International Harvester 304-392

Log in for inventory

Competition Cams K11-456-8

Xtreme Marine 242/248 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454; Good for jet boat with A or B impeller in bracket racing or performance use.

Log in for inventory

Competition Cams 42030511816

PUSHROD, XTREME RACE G2 8.425" LENGTH 5/16" DIA .107" WALL 210 RADIUS SET 16; Xtreme Race G2 Pushrod, 8.425 Inch Length, 0.3125 Diameter, 210 Radius, 4130 Chromoly, Set of 16

Log in for inventory

Competition Cams 4684-1

ID Spring Locator - 1.285" OD, .532" ID, .135" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4684 seat's 1.285" OD works well with our valve springs in ." guide applications.

Log in for inventory

Competition Cams 42140508216

PUSHROD, XTREME RACE G2 7.750" LENGTH 3/8" DIA .136" WALL 210 RADIUS SET 16; Xtreme Race G2 Pushrod, 7.750 Inch Length, 0.375 Diameter, 210 Radius, 4130 Chromoly, Set of 16

Log in for inventory

Competition Cams 08-412-8

Xtreme Energy 212/218 Hydraulic Roller Cam for OE Roller SBC; Mild performance applications, good mid-range, 3.23-3.73 gears. Slightly noticeable idle.

Log in for inventory