Filters
Competition Cams 12-675-4
Xtreme Energy 224/230 Solid Flat Cam for Chevrolet Small Block; Excellent response, good mid-range, noticeable idle.
Competition Cams 15-115-4
High Energy 192/200 Hydraulic Flat Cam for Chevrolet 200-229/3.8L V6; Excellent torque, good mileage. Works well with high gear ratios and overdrive transmissions. Good city driving.
Competition Cams 1823-8
Ultra Pro Magnum XD Rocker Set of 8 w/ 1.73 Ratio for BBC w/ 7/16" Stud; Chevrolet, 7/16" Stud/1.73" Ratio, XD Rocker Arms - Set of 8
Competition Cams 212
Two-Piece Billet Aluminum Timing Cover for Chevrolet 396-454 Big Block; Eliminate timing cover flex and erratic ignition timing with our two-piece billet aluminum timing cover for Chevrolet Big Block. Our cover allows for cams to be replaced without disturbing the oil pan seal.
Competition Cams 26926TS-KIT
GM LS Dual Valve Spring Kit w/ Tool Steel Retainers, .675" Max Lift; Including properly matched quality dual valve springs, 7 degree locks, viton seals, hardened seats and lightweight tool steel retainers, this spring kit is ready to bolt onto LS heads with aggressive cams with up to .675" valve lift.
Competition Cams 35-239-3
Xtreme 4x4 218/226 Hydraulic Flat Cam for Ford 351W; Good torque for 4x4 with aftermarket intake and headers. Excellent mid-range, works with lower gears.
Competition Cams 641-1
Machined Steel 7 Degree, 3/8", Single Groove Race Lock; Machined Steel Race Lock: 1 Groove, 7 Degree Angle, 3/8" Stem Size
Competition Cams 740-100
10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring
Competition Cams 775-100
7 Degree Steel Retainer Set 100 GEN III w/ 1.430"-1.460" OD Spring
Competition Cams 7917-1
Hi-Tech 6.250" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 6.250" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8485-16
Hi-Tech One-Piece 8.450" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.450" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8682-1
Dual Taper 9.250" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 9.250" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
