Filters
Competition Cams 12-677-4
Xtreme Energy 236/242 Solid Flat Cam for Chevrolet Small Block; Very strong mid-range torque and throttle response, 2200+ stall.
Competition Cams 1826-12
Ultra Pro Magnum XD Rocker Set of 12 w/ 1.6 Ratio for BBC w/ 7/16" Stud; Chevrolet, 7/16" Stud/1.6" Ratio, XD Rocker Arms - Set of 12
Competition Cams 35-243-4
Xtreme 4x4 226/234 Hydraulic Flat Cam for Ford 351W; Good torque and throttle response, needs intake and headers, lower gears and 2500+ stall.
Competition Cams 47602
Cam Degree Bushing - 2 Degree; A degree bushing is essential to getting your valve timing correct when you install and degree your cam. This degree bushing accurately positions your cam with 2 degrees of advance.
Competition Cams 512-1
1 PTFE Valve Seal for .500" Guide Size, 3/8" Valve Stem; COMP's Positive Stop PTFE valve seals offer more clearance for dual springs with better sealing than o-ring or umbrella seals. This 512 seal has a .600" outer diameter and fits applications with 3/8" valves and .500" OD valve guides.
Competition Cams 7751-16
Hi-Tech 6.200" Long, .080" Wall, 5/16" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 6.200" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7918-1
Hi-Tech 9.000" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 9.000" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8486-16
Hi-Tech One-Piece 8.650" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.650" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8683-1
Dual Taper 9.300" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 9.300" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 92-601-5
Mutha' Thumpr 227/241 Hydraulic Flat Cam for Buick 350; High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Competition Cams CL11-556-4
Nitrous HP 218/230 Hydraulic Flat Cam and Lifter Kit Chevrolet Big Block 396-454; High performance street, 100-150 HP nitrous kit or small blower.
