Filters
Competition Cams 35-255-5
Xtreme Energy Computer Controlled 210/214 Hydraulic Flat Cam for Ford 351W; EFI speed density, works with stock computer. Very strong torque, excellent mileage, good idle quality.
Competition Cams 4769-1
OD Spring Locator - 1.635" OD, .640" ID, .060" Thickness; Constructed from hardened steel alloy, COMP's locator cup handles high RPM and extreme spring pressures while holding the spring. Our 4769 features a 1.635" OD with a .640" ID that works with our 901, 26956, 26957, and 26955 springs.
Competition Cams 51-221-4
Xtreme Energy 212/218 Hydraulic Flat Cam for Pontiac 265-455; Strong torque through low end and mid-range, good idle.
Competition Cams 56-430-8
Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6; Limited high performance with rough idle. Needs intake, headers and 2500+ stall with 3.73 to 4.10 gears.
Competition Cams 64-247-4
High Energy 212/212 Hydraulic Flat Cam for Chrysler 170-225 6 Cylinder; Great power in mid-range RPM. Good choice for trucks and tow vehicles. Smooth idle.
Competition Cams 740-8
10 Degree Superlock Steel Retainer Set of 8 for 1.437"-1.500" OD Valve Spring; Steel Retainers: 1.437"-1.500" Spring Diameter
Competition Cams 7753-1
Hi-Tech 6.350" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 6.350" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 7920-1
Hi-Tech 9.100" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 9.100" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 824-16
High Energy Hydraulic Flat Lifter Set for '58-'67 Chrysler 383-440 and 426 HEMI.; With a patented orifice metering valve and a lightweight check valve disc these High Energy hydraulic flat lifters for '58-'67 Chrysler 383-440 and 426 HEMI provide quicker response and better performance.
Competition Cams 8488-16
Hi-Tech One-Piece 8.800" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.800" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8685-1
Dual Taper 9.400" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 9.400" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
