Filters
Competition Cams 12-682-5
Launcher Series 244/248 Solid Flat Cam for Chevrolet Small Block; .312" lobe lift - Good for short track restricted with .480" or .500" lift rule.
Competition Cams 1828-1
Ultra Pro Magnum XD Rocker w/ 1.8 Ratio for Chevrolet Big Block w/ 7/16" Stud; Machined from 8650 steel with a billet pushrod seat insert, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. This 1828 rocker features a 1.8 ratio for use with 7/16" stud Chevrolet 396-454 Big Block.
Competition Cams 21-215-4
High Energy 218/218 Hydraulic Flat Cam for Chrysler 383-440; Great replacement for 383 Magnum with 650-750 CFM carb, dual plane manifold, etc. Smooth idle 440, super torque.
Competition Cams 3207
High Energy Timing Set for Chevrolet 350 LT1; This High Energy timing set for '95+ Chevrolet 350 LT1 exceeds OE spec with cast iron cam and crank gears and a premium link belt chain, perfect for stock and mild performance applications.
Competition Cams 4769-16
OD Spring Locator Set of 16 - 1.635" OD, .640" ID, .060" Thickness; Constructed from hardened steel alloy, COMP's locator cups handle high RPM and extreme spring pressures while holding the spring. Our 4769 features a 1.635" OD with a .640" ID that works with our 901, 26956, 26957, and 26955 springs.
Competition Cams 646-431-13
XFI AFM 212/224 D, 210/222 N Hydraulic Roller Cam for GM LS2/LS3 GEN IV; Great all around torque for trucks and other heavy applications, across the board improvements power over stock AFM cams.
Competition Cams 741-1
10 Degree Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring; Precision machined from chromemoly steel then black oxided, this 10 degree retainer is designed specifically for a 1.500"-1.550" O.D. valve spring.
Competition Cams 7920-16
Hi-Tech 9.100" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 9.100" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8489-1
Hi-Tech One-Piece 8.850" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 8.850" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8685-16
Dual Taper 9.400" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 9.400" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 927-1
Race Endurance 1.551" OD Dual Spring, 1.950" Installed Height, 1 Spring; Engine Valve Spring
Competition Cams CL11-573-5
Nostalgia Plus 262/272 Solid Flat Cam and Lifter Kit Chevrolet Big Block 396-454; Nostalgia Plus version of legendary ZL-1 camshaft. Modern lobe design makes this cam better than the original.
