Filters
Competition Cams SK11-240-4
Xtreme Marine 234/244 Hydraulic Flat Cam SK-Kit for Chevrolet Big Block 396-454; Jet w/ A impeller, needs improved intake, likes headers.
Competition Cams SK31-330-3
Magnum 244/244 Hydraulic Flat Cam SK-Kit for Ford 221-302
Competition Cams 26903-1
SINGLE SPRING, 1.404 OD, 1.650 IH, .550 LIFT, 300 LBS/IN, HF; Designed for flat tappet cams, 26903 can be installed from 1.500" to 1.700" with a 1.404" OD, fitting a wide variety of early cylinder heads. An open load of 260 lbs provides safe operation for most hydraulic flat tappet Applications.
Competition Cams 5562-KIT
Premium DOD Delete Kit for GM GEN V LT1/L86; The GM LT1/L86 DOD Delete Kit includes everything needed to properly remove problematic DOD lifters. This kit includes block-off plugs, lifter trays, head gaskets, head bolts, lifters, exhaust gaskets, valley gasket and cam bolt.
Competition Cams 12-685-5
Launcher Series 248/252 Solid Flat Cam for Chevrolet Small Block; .322" lobe lift - Good for longer tracks, restricted carb. With stock rocker and .480" or .500" lift rule.
Competition Cams 1828-8
Ultra Pro Magnum XD Rocker Set of 8 w/ 1.8 Ratio for BBC w/ 7/16" Stud; CB, 7/16" Stud/1.8" Ratio, XD Rocker Arms - Set of 8
Competition Cams 21-221-4
Xtreme Energy 212/218 Hydraulic Flat Cam for Chrysler 383-440; Strong torque through low end and mid-range, good idle.
Competition Cams 3211
Gear Set for '62-'88 Chevrolet 153, 194, 230, 250, 292 w/ Aluminum Cam Gear; This gear set for '62-'88 Chevrolet 153 4 cylinder and 194, 230, 250 and 292 6 cylinder, featuring a steel cam gear, exceeds OE spec, perfect for stock and mild performance applications.
Competition Cams 4770-12
ID Spring Locator Set of 12- 1.500" OD, .585" ID, .060" Thickness; Locator Thickness:.60"
Competition Cams 51-225-4
Xtreme Energy 240/246 Hydraulic Flat Cam for Pontiac 265-455; Street/strip, needs 9:1+ compression. 2800+ stall, headers, gears, rough idle.
Competition Cams 56-450-8
Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6; Works with throttle body and sequential port injection with aftermarket chip. Good low end and mid-range.
Competition Cams 7755-1
Hi-Tech 9.400" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 9.400" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
