Filters
Competition Cams 26981-1
Performance Street 1.240" OD Beehive Spring, 1.700" Installed Height, 1 Spring; Beehive Valve Spring: Top 1.065" OD, .650" ID
Competition Cams 3219
High Energy Timing Set for '64-'97 AMC 199-258 and Jeep 4.0; This High Energy timing set for '64-'97 AMC 199-258 exceeds OE spec with cast iron cam and crank gears and a premium link belt chain, perfect for stock and mild performance applications.
Competition Cams 35-324-8
Xtreme Energy Computer Controlled 218/224 Cam for Ford 5.0L; For use with 1.7:1 rockers. Mild modifications, 3.20-3.73 gears, larger throttle body and mass air, good heads and manifold.
Competition Cams 4509-16
Stud Girdle Adjusting Nut Set of 12 for 3/8" Stud w/ (4) 4509S Snap Rings; With a 2.000" overall length, this adjusting nut set is designed for 3/8" rockers with a stud girdle. Comes with snap rings.
Competition Cams 4772-1
ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4772 features a 1.550" OD and a .570" ID that works well with our 925 and 939 dual valve springs.
Competition Cams 51-233-4
Magnum 224/224 Hydraulic Flat Cam for Pontiac 265-455; Fair idle, good mid-range torque. Can use stock torque converter, best with 2000+ stall. Daily performance use.
Competition Cams 7758-1
Hi-Tech 9.550" Long, .080" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 9.550" long Hi-Tech 3/8" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 7923-16
Hi-Tech 9.300" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 9.300" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8274-1
Dual Taper 7.900" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 7.900" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 8492-1
Hi-Tech One-Piece 9.000" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 9.000" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8690-1
Dual Taper 9.650" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance due to offset lifters and higher-flowing intake ports, this .165" wall, dual taper 7/16" diameter 9.650" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
