Filters
Competition Cams 1832-1
Ultra Pro Magnum XD Rocker w/ 1.6 Ratio for Ford 289, 302, 351W w/ 7/16" Stud; Machined from 8650 steel with a billet pushrod seat insert, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. This 1832 rocker features a 1.6 ratio for use with 7/16" stud Ford 289, 302 and 351 Windsor.
Competition Cams 21-228-4
Xtreme Energy HI-LIFT 241/247 Hydraulic Flat Cam for Chrysler 383-440; Hot street cam. 10:1 compression, lower gears, headers and 3000+ stall. Strong mid-range with a rough idle.
Competition Cams 26981-12
Performance Street 1.240" OD Beehive Spring, 1.700" Installed Height, 12 Springs; Bottom 1.240" OD, .825" ID
Competition Cams 35-328-8
Xtreme Energy Computer Controlled 224/230 Cam for Ford 5.0L; For use with 1.7:1 rockers. Major modifications, 3.55 gear or lower, 2500+ stall.
Competition Cams 4509S-1
Stud Girdle Adjusting Nut for 3/8" Stud w/ Snap Ring; With a 2.000" overall length, this adjusting nut is designed for 3/8" rockers with a stud girdle. Comes with a snap ring to hold girdle bar.
Competition Cams 4772-100
ID Spring Locator Set of 100 - 1.550" OD, .570" ID, .060" Thick
Competition Cams 51-234-4
Magnum 230/230 Hydraulic Flat Cam for Pontiac 265-455; Choppy idle, increased compression advised. Needs 2500+ stall and lower gear, use headers.
Competition Cams 6500IDB-1
Engine Timing Belt Idler; Oversized Idler Assembly for All #6500 Series Chevy Drives (1.437" OD)
Competition Cams 7758-16
Hi-Tech 9.550" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 9.550" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 7924-1
Hi-Tech Pushrod Stock Length Chrysler B 383-400 w/ Adjustable Rocker Arms; Hi-Tech Pushrods: 3/8" Diameter, 8.710" Length
Competition Cams 8274-16
Dual Taper 7.900" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 7.900" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 8492-16
Hi-Tech One-Piece 9.000" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 9.000" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.