Filters
Competition Cams 127020
Mutha' Thumpr NSR 234/254 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3-V; Very rough idle, biggest cam for stock heads. Great power above 4900 RPM. Compatible with stock valve springs, benefits from converter and gears, requires cam phaser upgrade and custom tuning.
Competition Cams 1834-1
Ultra Pro Magnum XD Rocker w/ 1.7 Ratio for Ford 289, 302, 351W w/ 7/16" Stud; Machined from 8650 steel with a billet pushrod seat insert, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. This 1834 rocker features a 1.7 ratio for use with 7/16" stud Ford 289, 302 and 351 Windsor.
Competition Cams 21-233-4
Xtreme Energy 252/260 Solid Flat Cam for Chrysler 383-440; Max effort street/bracket race cam. 10.5:1 compression, 3500+ stall and low gears.
Competition Cams 4511-16
Stud Girdle Adjusting Nut Set for Big Block Ford w/ 7/16" Stud; For Big Block Fords specifically, these 7/16" stud girdle adjusting nuts are threaded through the full length.
Competition Cams 4773-16
ID Spring Locator Set of 16 - 1.540" OD, .640" ID, .060" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4773 features a 1.540" OD and a .640" ID that works well with our 932, 935 and 26094 dual valve springs.
Competition Cams 51-244-4
Magnum 224/224 Solid Flat Cam for Pontiac 265-455; Good idle, strong mid-range torque. Excellent cam for mild street engines.
Competition Cams 57210
266 Camshaft Kit for Turbo Honda B-Series; Engine Camshaft
Competition Cams 6500US-1
Distributor Bracket; Upper Seal for #6500, #6502, #6504, #6506 Hi-Tech Belt Drive Systems
Competition Cams 776-1
7 Degree Titanium Retainer for GM GEN III w/ 8mm Valve w/ 1.430-1.460 OD Spring; Precision machined from 6AL4V titanium, this retainer features better material consistency and bullet proof durability. This 7 degree retainer fits GM LS engines with a 1.430"-1.460" OD valve spring.
Competition Cams 7928-16
Hi-Tech 8.950" Long, .080" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.950" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
Competition Cams 8495-1
Hi-Tech One-Piece 9.150" Long, .135" Wall, 3/8" Diameter Pushrod; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 9.150" long Hi-Tech 3/8" diameter pushrod is 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 869-16
High Energy Hydraulic Flat Lifter Set for Buick 350-455 and Cadillac 472-500; With a patented orifice metering valve and lightweight check valve disc these High Energy hydraulic flat lifters for Buick 350-455 and Cadillac 472-500 ensure quick response and better performance.
