Filters
Competition Cams 01-412-8
XE Computer Controlled 212/218 Hydraulic Roller Cam Chevrolet Big Block GEN VI; Very good low RPM torque. Great for towing applications, works with fuel injection.
Competition Cams 11-217-4
Magnum 224/224 Solid Flat Cam for Chevrolet Big Block 396-454; Good for everyday driving. Works well with headers. In 396-402c.i. use slightly lower gears. Slightly rough idle.
Competition Cams 12-214-4
Magnum/Drag Race 253/253 Hydraulic Flat Cam for Chevrolet Small Block; Pro Street/bracket, limited street driving. Intake, gears, 3500+ stall. Racy idle. 10.5:1 compression.
Competition Cams 1834-16
Ultra Pro Magnum XD Rockers w/ 1.7 Ratio for Ford 289, 302, 351W w/ 7/16" Stud; Machined from 8650 steel with a billet pushrod seat insert, these Ultra Pro Magnum XD rockers can handle up to 1,000 lbs of spring pressure. These 1834 rockers feature a 1.7 ratio for use with 7/16" stud Ford 289, 302 and 351 Windsor.
Competition Cams 21-237-4
Magnum 231/231 Hydraulic Flat Cam for Chrysler 383-440; For 9:1-10:1 compression. 383 needs 2500 stall. 440 needs 2000+ stall. Use 700-800 CFM carburetor, headers, 3.91+ gears.
Competition Cams 26995-1
Performance Street 1.415" OD Beehive Spring, 1.700" Installed Height, 1 Spring; Bottom 1.415" OD, 1.000" ID, 305 @ 1.100 - Single
Competition Cams 35-349-8
Xtreme Energy Computer Controlled 212/218 Hydraulic Roller Cam for Ford 5.0L; Mild street performance, good upgrade for stock cam. Works with O.B.D.1
Competition Cams 4511-8
Stud Girdle Adjusting Nut Set of 8 for Big Block Ford w/ 7/16" Stud; 7/16 Stud Girdle Adjusting Nut-1
Competition Cams 4774-1
ID Spring Locator - 1.625" OD, .570" ID, .060" Thickness; Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4774 features a 1.625" OD and a .570" ID that works well with our 996, 998, 26099 and 991 dual valve springs.
Competition Cams 51-245-4
Magnum 236/236 Solid Flat Cam for Pontiac 265-455; Mild idle, street machine cam. Needs 9.5:1+ compression, 2000+ stall and headers.
Competition Cams 57300
Quiktyme 218/218 Solid Cams for Honda B16A/B17A/B18C/B18C5 V-TEC; Excellent mid-range to top end power for serious performers. Excellent high RPM power.
Competition Cams 7929-1
Hi-Tech 6.800" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 6.800" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
