Filters
Competition Cams 8495-16
Hi-Tech One-Piece 9.150" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 9.150" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall Hi-Tech pushrods. Comes with a 210 tip radius.
Competition Cams 8692-1
Dual Taper 9.750" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance due to offset lifters and higher-flowing intake ports, this .165" wall, dual taper 7/16" diameter 9.750" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams CL11-678-5
Xtreme Energy 244/252 Solid Flat Cam and Lifter Kit Chevrolet Big Block 396-454; Street/strip, 3000+ stall, likes headers and gears, rough idle.
Competition Cams K21-220-4
Xtreme Energy 206/212 Hydraulic Flat Cam K-Kit for Chrysler 383-440; Very strong torque, excellent mileage, smooth idle.
Competition Cams K42-221-4
Xtreme Energy 212/218 Hydraulic Flat Cam K-Kit for Oldsmobile 260-455; Strong torque through low end and mid-range, good idle.
Competition Cams 24-600-11
Thumpr 227/241 Hydraulic Roller Cam for Chrysler 426 HEMI; High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle.
Competition Cams 1505CPG
Shaft-Mount Aluminum 1.7 Ratio Rocker Kit for BBC w/ Dart 320/360; With a 2024 aluminum rocker and 8620 hardened steel shaft, this shaft-mount rocker system adds stability to the engine which frees up horsepower. This system features 1.7 ratio rockers for BBC w/ Brodix 2+/Dart 320/360 heads.
Competition Cams 310203112
TAPPET, DLC SOLID FLAT TAPPET .875" DIA FORD APPLICATIONS SET 6 CYL; Tappet features a Diamond-Like Coating (DLC) face that forms an extremely hard, tough and high-lubricity surface to reduce friction at the Cam lobe/lifter interface, extending lifter and Camshaft life significantly.
Competition Cams 26942-12
SET, SINGLE SPRING W/ DAMPER, 1.440 OD, 1.750 IH, .600 LIFT, 350 LBS/IN; Designed for both flat tappet and hydraulic roller cams, 26942 fits applications near a 1.750" installed height and a spring pocket of 1.440". A 350 lbs/in rate and 338 lbs of open load are suitable for many applications.
