Filters
Competition Cams 4774-16
ID Spring Locator Set of 16 - 1.625" OD, .570" ID, .060" Thickness; Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4774 features a 1.625" OD and a .570" ID that works well with our 996, 998, 26099 and 991 dual valve springs.
Competition Cams 51-247-4
Magnum 260/260 Solid Flat Cam for Pontiac 265-455; Race idle, Pro Street. Needs 10.5:1+ compression and 3500+ stall. Limited street use.
Competition Cams 57400
Quiktyme 222/222 Solid Cams for Honda B16A/B17A/B18C/B18C5 V-TEC; Great top end power for radical street or race applications.
Competition Cams 6502LS-1
LOWER SEAL,FOR 6502/6506 BELT; Lower Seal for #6502 and #6506 Hi-Tech Belt Drive
Competition Cams 743-8
7 Degree Steel Retainer Set of 8 for 11/32" Valve w/ 1.437"-1.500" Spring; 7°
Competition Cams 776-16
7 Degree Titanium Retainer Set GM GEN III w/ 8mm Valve w/ 1.430-1.460 OD Spring; Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 7 degree retainers fit GM LS engines with 1.430"-1.460" OD valve springs.
Competition Cams 7930-1
Hi-Tech 6.850" Long, .080" Wall, 5/16" Diameter Pushrod; Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 6.850" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.
Competition Cams 8278-16
Dual Taper 8.000" Long, .165" Wall, 7/16" Diameter Pushrod Set; For applications that need more clearance these .165" wall thickness, dual taper 7/16" diameter 8.000" long pushrods offer the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 8497-16
Hi-Tech One-Piece 8.380"/9.350" Long, .135" Wall, 3/8" Diameter Pushrod Set; Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, these 8.380/9.350" long Hi-Tech 3/8" diameter pushrods are 37% stiffer than .080" wall pushrods. Comes with a 210 tip radius.
Competition Cams 8693-1
Dual Taper 9.800" Long, .165" Wall, 7/16" Diameter Pushrod; For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 9.800" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
Competition Cams 988-8
VALVE SPRINGS, 1.384" 2 SPRING; Dual Valve Springs: 1.384" OD Outer, .804" ID Inner
Competition Cams CL11-684-5
Xtreme Marine 240/240 Hydraulic Flat Cam/Lifter Kit Chevrolet Big Block 396-454; Excellent choice as a replacement for 575 SCI, 600 SC, and 800 SC marine engines.
